Symphony Clear Interior Finish

Symphony is a clear, water-based, completely VOC compliant, has no offensive odor and can be easily applied by sprayer. When applied to bare wood, Symphony enhances the natural grain, color and beauty.
FREE SHIPPING ON 5 GALLON PAILS TO CONTINENTAL USA.
SKU:
From $2.00
By Sashco

Size
Color

When natural beauty is your passion, Symphony is “music to your eyes.” When applied to bare wood, Symphony enhances the natural grain, color and beauty. But it can also be used over many stains to display an orchestra of visual impact—adding depth and richness to the color.

It's water-based, completely VOC compliant, has no offensive odor and can be easily applied by spray. (Symphony™ is available in 1- and 5-gallon containers.) Symphony™, gloss or satin, is the beautiful way to protect the natural elegance of interior logs.

Sashco Symphony Features & Benefits
• Enhances natural wood grain.
• Smooth finish makes walls easy to clean.
• Use alone or over Sashco's Transformation Siding & Trim Stain or Capture Log Stain.
• Use on all vertical wood surfaces.
• Water-based – easy to apply and clean up.
• Freeze-thaw stable.

Sashco Symphony Coverage Rate
• 1st coat: 200-300 sq. ft. per gallon
• 2nd coat: 400-500 sq. ft. per gallon
• As with all stains and clear coats, coverage will vary depending upon roughness and porosity of the wood.

Sashco Symphony Application Instructions
• Apply when 50°-90°F. Best results are obtained at 60°- 90°F.
• Avoid applying in cold drafts or areas with no overhead roofs.
• When applying Symphony to bare wood, for best results sand the wood to a smooth finish with fine sandpaper.
• Remove all dust before finishing.
• Do not use steel wool; it may cause rust stains.
• For a smoother finish, sand between coats.
• Clean up: Soap and water for hands and equipment if the Symphony is still wet. If allowed to dry, paint thinner or stronger solvents will be required.
• Spray equipment should be cleaned with water followed by cleaning with paint thinner.
• Dry time: Symphony will dry to touch in 1 hour and can be
sanded after 2 hours. Recoating can be done after 1-2 hours.
• Actual dry time depends on thickness of coats, temperature and humidity.

Sashco Symphony Resources
Symphony Interior Clear Coat Product Guide
MSDS Sheet - Sashco Symphony Gloss

Product Questions

  • What is the number of coats of Symphony that should be used?

    Apply up to 2 coats. If being applied over Capture or Transformation you could use 1 coat. 2 coats is usually the standard amount.

  • Is sanding necessary between coats?

    No. But for a smooth surface you may want to. Just be sure to do it lightly.

  • Can Symphony be used over oil based stain in place of polyurethane?

    No, Symphony cannot be used over an oil based stain since it is a water-based finish.

  • Can Symphony be used on floors or interior stairs?

    Symphony can be used for a variety of interior surfaces, but Sashco does not recommend it to be used for floors or for any exterior use.

DETAILS

When natural beauty is your passion, Symphony is “music to your eyes.” When applied to bare wood, Symphony enhances the natural grain, color and beauty. But it can also be used over many stains to display an orchestra of visual impact—adding depth and richness to the color.

It's water-based, completely VOC compliant, has no offensive odor and can be easily applied by spray. (Symphony™ is available in 1- and 5-gallon containers.) Symphony™, gloss or satin, is the beautiful way to protect the natural elegance of interior logs.

Sashco Symphony Features & Benefits
• Enhances natural wood grain.
• Smooth finish makes walls easy to clean.
• Use alone or over Sashco's Transformation Siding & Trim Stain or Capture Log Stain.
• Use on all vertical wood surfaces.
• Water-based – easy to apply and clean up.
• Freeze-thaw stable.

Sashco Symphony Coverage Rate
• 1st coat: 200-300 sq. ft. per gallon
• 2nd coat: 400-500 sq. ft. per gallon
• As with all stains and clear coats, coverage will vary depending upon roughness and porosity of the wood.

Sashco Symphony Application Instructions
• Apply when 50°-90°F. Best results are obtained at 60°- 90°F.
• Avoid applying in cold drafts or areas with no overhead roofs.
• When applying Symphony to bare wood, for best results sand the wood to a smooth finish with fine sandpaper.
• Remove all dust before finishing.
• Do not use steel wool; it may cause rust stains.
• For a smoother finish, sand between coats.
• Clean up: Soap and water for hands and equipment if the Symphony is still wet. If allowed to dry, paint thinner or stronger solvents will be required.
• Spray equipment should be cleaned with water followed by cleaning with paint thinner.
• Dry time: Symphony will dry to touch in 1 hour and can be
sanded after 2 hours. Recoating can be done after 1-2 hours.
• Actual dry time depends on thickness of coats, temperature and humidity.

Sashco Symphony Resources
Symphony Interior Clear Coat Product Guide
MSDS Sheet - Sashco Symphony Gloss

REVIEWS
PRODUCT QUESTIONS

Product Questions

  • What is the number of coats of Symphony that should be used?

    Apply up to 2 coats. If being applied over Capture or Transformation you could use 1 coat. 2 coats is usually the standard amount.

  • Is sanding necessary between coats?

    No. But for a smooth surface you may want to. Just be sure to do it lightly.

  • Can Symphony be used over oil based stain in place of polyurethane?

    No, Symphony cannot be used over an oil based stain since it is a water-based finish.

  • Can Symphony be used on floors or interior stairs?

    Symphony can be used for a variety of interior surfaces, but Sashco does not recommend it to be used for floors or for any exterior use.