Twin Creeks Log Home Supply

Lumber Products

Eastern White Pine, Western Red Cedar, and Douglas Fir species, each of which boasts a rustic, knotty appearance and beautiful grain.

Lumber Product FAQ's

How Do I Determine How Much Lumber I Need?

One of the most common problems homeowners face when planning their home is finding out how much lumber they need to cover a particular wall. Lumber prices are quoted by the linear (running) foot, but most people only know how many square feet they have. If you already know how many square feet you have to cover, you can easily convert that amount to linear feet.

Converting Square Feet to Linear Feet:

1. Start with the amount of square feet you have to cover and multiply it by 12.
2. Next, divide that figure by the actual face width of the board you plan to use. This will give you the linear footage. Note: the actual dimensions of the board will almost always be slightly smaller than the nominal dimensions. We note this width in the details of each product as the "Stack Height" or "Coverage" specification.

You have 1,000 square feet of wall space that you would like to cover with a 1x8 Tongue and Groove board. The 1x8 in this case has an actual face width of 7”. Convert your square feet amount to linear feet.

1. 1,000 square feet X 12 = 12,000
2. 12,000 ÷ 7 = 1,714 linear feet

What type of logs do you sell?

Our logs are Eastern White Pine and Western Red Cedar. They are available in a variety of profiles.

Do you sell pre-cut kits?

No, we only sell logs by the linear foot. This method consistently saves our customers thousands of dollars over pre-cut kits.

Do you sell kiln dried logs?

Yes! Our kiln dried logs are dried to a surface moisture content of approximately 18%. We always keep the 6x8 white pine kiln dried logs in stock, available for next day shipping. All other profiles are available three weeks from the date of order. We also sell high quality air dried logs in the same variety of profiles as the kiln dried logs.