UV Guard Advance Clear Wood Finish

UV Guard Advance Clear Finish is a water-based crystal clear coating that will add depth and a modest sheen to your stained wood. Designed to be used as the top coat for the UV Guard Wood Finish stain systems, but can be used with most other water based stains. Provides long-term stain protection from moisture, mold and mildew. FREE SHIPPING ON 5 GALLON PAILS TO CONTINENTAL USA.
SKU
UVGA
Starting at $62.96

Have questions about this product?
Call us at 800-299-8981.

Free Ground Shipping on 5 Gallon Pails
We are offering free shipping for 5 gallon pails of this product purchased online and shipping to the Lower 48 United States. Offer does not apply to Alaska, Hawaii, and the US Territories. Free Shipping applies to this item only and not the entire order.

Weatherall UV Guard Advance Clear Wood Finish is a water-based, environmentally friendly, crystal clear coating that will add depth and a modest sheen to your stained wood. It forms a breathable film yet repels moisture allowing your stain greater color retention and increased protection from harmful UV rays. It was designed to be used as the top coat for the UV GUARD Wood Finish stain systems but can be used with MOST OTHER WATER BASED STAINS. UV Guard Advance Clear Wood Finish is easy to apply and will not darken your existing stain after each application. UV Guard Advance Clear Wood Finish is compatible with most sealant materials, including Triple Stretch Chinking, UV Guard Textured Caulk, and UV Guard Premium Caulk.

Weatherall UV Guard Advance Clear Wood Finish Uses:
• Exterior, Log Homes, Wood Siding, Timbers, Fences, Shingles and other Vertical Surfaces.
• Weatherall UV Guard Advance is not recommended for use on high density, high oil content or exotic woods.

Weatherall UV Guard Advance Features & Benefits
• Crystal Clear Finish.
• Easy Application.
• Long Term Stain Protection.
• Easy Maintenance System.
• Adds Depth to Your Wood.
• Modest or Natural Looking Sheen.
• Water Repellent.
• Eco-Friendly.
• Low VOC Formula.
• Soap and Water Clean Up.
• Virtually No Odor.
• Mold and Mildew Protection.
• Soap and Water Clean Up.
• Compatible with most other finishing products.

Weatherall UV Guard Advance Coverage Rates
• 200 – 400 sq. ft. per gallon
**The coverage rates are highly dependent upon the porosity of the wood and the condition of the exisiting stain. Do not thin or dilute product.

UV Guard Advance Resources:

UV Guard Advance Colors
• Weatherall UV Guard Advance Clear Wood Finish is a crystal clear wood finish for maintenance purposes.

Weatherall UV Guard Advance Application & Technical Resources:
The Weatherall Definitive Guide to Log Home Staining and Chinking
UV Guard Advance Product Brochure
UV Guard Advance Product Guide
UV Guard Advance MSDS

More Information
BrandWeatherall
Stain BaseWater-Based
Stain Opacity Clear
Stain Use AreaLogs, Siding, Exterior
Guides / Product Info

Weatherall UV Guard Advance Application Methods
• Weatherall UV Guard can be easily applied by brush, airless sprayer or pump style garden sprayer.
• If spray application is used, back brushing is mandatory. Immediately brush all runs.

Weatherall UV Guard Advance Application Tips
• Always test a sample on your wood.
• Apply finish between 40 and 90 degrees.
• Do not apply in direct sunlight.
• Immediately brush all runs.
• Remove mold and mildew prior to application.
• Use compatible finishing products.

Weatherall UV Guard Advance Recommended Application
• Make certain that the surface to be coated is free from all dirt, oil, grease, mildew, fungus or loose bark prior to stain application.
• UV Guard Advance Clear Wood Finish may be applied by brush, airless sprayer or pump sprayer.
• Always back brush the product to remove drips and runs.
• For best results, apply UV Guard Advance Clear Wood Finish over a UV Guard Wood Finish stain product.
• UV Guard Advance Clear Wood Finish is not designed to be a stand-alone product.
• Advance Clear Wood Finish will be dry to the touch in 30 minutes to 1 hour and completely dry in 24 to 48 hours depending on temperature and relative humidity.
• After heavy rain, wood surfaces should be given several days to dry before application.
• If weather is hot and sunny, it is best to work around the house so you are always in the shade.
• Do not apply UV Guard Advance Clear Wood Finish to hot surfaces.

Weatherall UV Guard Advance Maintenance Instructions
• Once your existing finish starts to look dull then simply clean the surface and apply another coat of UV Guard Advance Clear Wood Finish.
• Expect to re-apply every 2 to 4 years on the southern exposure and every 3 to 5 years on the other sides of your structures.
• Please remember that the overall durability of your finish is dramatically affected by the preparation of the surface prior to the finish work and how good of a job you do during the application process.

Weatherall UV Guard Advance Clean Up
• Clean up immediately with soap and water.
• Dried brushes will require cleaning with lacquer thinner.
• Spray equipment should be cleaned immediately per the equipment manufacturer’s recommendations for latex finishes.

We found other products you might like!