Woodguard ITF Interior Transparent Finish

Application Methods:
• Brush.
• Roller.
• Sprayer.
• Caution: When spraying pigmented or pre-tinted Woodguard ITF, you will need to back brush or roll the sprayed surfaces immediately to maintain a sheer, even, translucent appearance.
• Because Woodguard ITF dries very quickly, the spray application option may be a two-person job, one with the sprayer, one with a brush or low nap roller.

Surface Preparation:
• Lacquer, shellac, wax, grease, dirt, mold and old finishes should be removed before application.
• Sand clean, dry wood with an 80 to 120-grain sand paper to obtain a uniform appearance.
• Ensure that the wood surface is thoroughly dry before application (less than 18% moisture content).
• Remove all surface dust with a damp rag.
• Stir well before and occasionally during use. For best results, do not apply below 50°F.
• Apply a thin coat in the direction of the grain, working the material into the fibers of the wood. Expect coverage of approximately 500 square feet to the gallon for smooth wood;  250 square feet per gallon for rough wood on the first coat. The second coat will cover a greater surface area than the first.
• Maintain a wet edge.
• Brush, roll or spray application is suitable.
• Promptly clean all tools, rags, etc. with warm, soapy water.
• Wait at least one hour or until dry to the touch before very gently sanding with a 180-grain sandpaper. Remove all superficial dust with a damp rag before applying a second coat.  Two coats are sufficient. Do not use steel wool.
• ITF Clear is tintable with Universal pigments. Consult your dealer for assistance in pigmenting this product to a light, semi-transparent stain only. Solid colors cannot be achieved.
• When pigmented, this product can be used as a wiping stain.
Brush in the direction of the grain, and wipe off within several minutes. For deep intensity, brush on additional coats.
• VOC-compliant.

Tinting WoodGuard ITF:
• Woodguard ITF is only available in clear.
• Tinting: Woodguard ITF may be tinted with Universal Machine Colorants or water-based pigments by qualified professional paint store personnel.
• Woodguard ITF tints fast. A little pigment goes a long way. Consult your dealer for assistance.
• When pigmented, this product can be used as a wiping stain. Brush in the direction of the grain, and wipe off within several minutes.
• For deeper intensity, brush on additional coats and wipe until desired color is achieved, lightly sanding between coats if desired.

Surface Preparation:
• Remove all hardware (or tape over if not possible).
• Fill cracks and holes with a quality, acrylic, tinted wood filler.
• Lightly sand all surfaces with an 80-120 grit sand paper to achieve a smooth finish. This may require a second sanding with a 180-grit sandpaper to achieve the desired smooth surface.
• Remove dust with a vacuum and damp cloth.
• Wash and clean all wood surfaces to be painted with 4 oz. Tri-Sodium Phosphate (or phosphate free substitute) in one gallon of warm water to remove all surface dirt, wax, grease and contaminants. Allow surface to thoroughly dry before application.

Application Information:
• Woodguard ITF has an initial “milky” appearance, which forms a transparent, protective coating.
• The log or timber must have a moisture content less than 18% in the outer ½ inch.
• Stir well before, and occasionally during, use. For best results, do not apply below 50ºF.
• Apply a thin coat in the direction of the grain, working the material into the fibers of the wood.
• Brush, roll or spray application is suitable.
• Caution: When spraying pigmented or pre-tinted Woodguard ITF, you will need to backbrush or roll the sprayed surfaces immediately to maintain a sheer, even, translucent appearance.
• Because Woodguard ITF dries very quickly, the spray application option may be a two-person job, one with the sprayer, one with a brush or low nap roller.
• Maintain a wet edge to prevent lap marks.

Woodguard Interior Transparent Finish Application & Technical Resources:
• Product Guide
• Safety Data Sheet

CA Residents Prop 65: www.p65warnings.ca.gov