Albion Follow Plate for Tapered Pails (#504-G07)
The Albion 504-G07 Follow Plate speeds up the loading of chinking from tapered 5 Gallon tapered metal or plastic pails. It is designed for use with bulk loading 2" Diameter Guns by Albion. Its nitrile seal allows the follow plate to load all the product along the sides of tapered chink pails.
This follow plate can be used with pails of Weatherall, Sashco, and Perma-Chink latex caulk and chinking. Each of these brands now uses tapered pails.
DIRECTIONS: Open pail and place Follow Plate directly on top of material (after mixing, if necessary). Press it down firmly to eliminate air pockets. Remove front cap from gun and advance the rod as far forward as it will go. Thread the gun into the Plate. While exerting pressure down onto the plate, pull back on the rod to fill the gun. When full, unthread the gun and replace the cap and nozzle on the gun. Cover the opening on the follow plate with a piece of plastic to limit material contamination and curing between fills.
Barrel Diameter (inches): 2"
Barrel Length (inches): All