Skip to content
White Pine Half Log Mantel With Flat Back
White Pine Half Log Mantel With Flat Back Specifications:
• Typical Depth: 5 1/2"
• Shelf Width: Variable width, typically 10 1/2" - 11 1/2" actual width.
• Available Lengths: 6' and 7' lengths are typically in stock. Lengths up to 10' are available for special order. They can also be cut to a specific length by request.
• Drying Type: Kiln-Dried
• Texture: Hand Peeled
• Finishing: Unfinished
• Fastener Type: Lag Screw or Bolt
• Typical Lead Time: 3-5 Days to ship.
• Shipping Options: Lengths 7' and lower can ship via UPS. Lengths longer than 7' need to ship by truck methods such as LTL, roll-back, or flatbed tractor trailer.
White Pine Half Log Mantel With Flat Back Features:
• This back of this mantel is cut flat to allow a flush installation.
• Kiln-Dried to reduce moisture content resulting in less weight and improved acceptance of stains or finishes.
• Our White Pine Half Log Mantels are hand-peeled, providing a natural look and feel that is particular to each individual piece.
• White Pine's distinct grain pattern provides both rustic and elegant appeal.
Installation
• Mantel Installation Guide
• 4" lag screws are provided to fasten the mantel through the wall studs from behind.
• Please refer to local building and fire codes when installing your mantel to ensure you meet height requirements for your project.
Checking
All solid wood products are susceptible to a natural cracking over time called checking. Checking has no effect on the strength or durability of the wood.
Maintenance
• With any unfinished interior wood, applying a quality finish to all surfaces (including the ends) is recommended. An interior finish protects the wood from moisture absorption and UV degradation, and helps prevent any finger stains caused by touching the unfinished wood.
• On rare occasions, coatings may be blocked from adhering due to an effect called mill glaze. If you encounter mill glaze, we recommend sanding the piece lightly.
• We offer a wide selection of Water Based Interior Finishes that we can recommend based on the final sheen level and look that is desired. Most interior finishes do not have to be re-coated or reapplied depending on the UV exposure to your home. You can find all of the interior stains and finish products that we carry at our Interior Stains page.
|
DETAILS
White Pine Half Log Mantel With Flat Back Specifications:
• Typical Depth: 5 1/2"
• Shelf Width: Variable width, typically 10 1/2" - 11 1/2" actual width.
• Available Lengths: 6' and 7' lengths are typically in stock. Lengths up to 10' are available for special order. They can also be cut to a specific length by request.
• Drying Type: Kiln-Dried
• Texture: Hand Peeled
• Finishing: Unfinished
• Fastener Type: Lag Screw or Bolt
• Typical Lead Time: 3-5 Days to ship.
• Shipping Options: Lengths 7' and lower can ship via UPS. Lengths longer than 7' need to ship by truck methods such as LTL, roll-back, or flatbed tractor trailer.
White Pine Half Log Mantel With Flat Back Features:
• This back of this mantel is cut flat to allow a flush installation.
• Kiln-Dried to reduce moisture content resulting in less weight and improved acceptance of stains or finishes.
• Our White Pine Half Log Mantels are hand-peeled, providing a natural look and feel that is particular to each individual piece.
• White Pine's distinct grain pattern provides both rustic and elegant appeal.
Installation
• Mantel Installation Guide
• 4" lag screws are provided to fasten the mantel through the wall studs from behind.
• Please refer to local building and fire codes when installing your mantel to ensure you meet height requirements for your project.
Checking
All solid wood products are susceptible to a natural cracking over time called checking. Checking has no effect on the strength or durability of the wood.
Maintenance
• With any unfinished interior wood, applying a quality finish to all surfaces (including the ends) is recommended. An interior finish protects the wood from moisture absorption and UV degradation, and helps prevent any finger stains caused by touching the unfinished wood.
• On rare occasions, coatings may be blocked from adhering due to an effect called mill glaze. If you encounter mill glaze, we recommend sanding the piece lightly.
• We offer a wide selection of Water Based Interior Finishes that we can recommend based on the final sheen level and look that is desired. Most interior finishes do not have to be re-coated or reapplied depending on the UV exposure to your home. You can find all of the interior stains and finish products that we carry at our Interior Stains page.
MORE INFORMATION
|
|
