{"product_id":"radiata-pine-s4s-trim-boards","title":"Radiata Pine S4S Trim Boards","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003eRadiata Pine S4S Trim Product Specifications: \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n  •\u003cstrong\u003e Available Lengths:\u003c\/strong\u003e 8’, 10’, 12’, 14’, and 16’.  Specified  piece counts are available depending upon current stock at time of order. \u003cbr\u003e\n  •\u003cstrong\u003e Grade:\u003c\/strong\u003e Claymark C Select Finish Grade\u003cbr\u003e\n  •\u003cstrong\u003e Texture:\u003c\/strong\u003e Sanded on Four Sides (S4S).\u003cbr\u003e\n  •\u003cstrong\u003e Drying Type:\u003c\/strong\u003e Kiln-Dried \u003cbr\u003e\n  • \u003cstrong\u003eRecommended Fastener:\u003c\/strong\u003e Stainless Steel Finish Nail \u003cbr\u003e\n  •\u003cstrong\u003e Typical Weight:\u003c\/strong\u003e 1.5  lbs per board foot. \u003cbr\u003e\n  •\u003cstrong\u003e Dimensions:\u003c\/strong\u003e Our  trim boards are cut to Standard Dimensions, which means that the board’s  finished dimensions will be slightly smaller than its nominal dimensions.  For example, a finished 1x4 S4S trim board  will net ¾” x 3 ½”.  \u003cbr\u003e\n  •\u003cstrong\u003e Shipping Options:\u003c\/strong\u003e Flat-bed tractor trailer, Roll Back, LTL Carrier. Shipping method is determined  based on location and order size to minimize cost. \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage  Calculations:\u003c\/strong\u003e\u003cbr\u003e\n  You can calculate the coverage for the amount of trim needed  for your project by using our Tips page: \u003ca href=\"https:\/\/www.twincreeksloghomes.com\/pages\/tips#faq-estimating\"\u003eHow Do I Determine How Much Lumber I Need?\u003c\/a\u003e Please call us if you would like a free takeoff for your project as well. \u003cbr\u003e\n\u003c\/p\u003e\n    \u003cstrong\u003ePreparation  Information:\u003c\/strong\u003e\u003cbr\u003e\n  Our Kiln Dried Radiata Pine S4S Trim is ready for installation once received on  your jobsite. However, wood will shrink and swell with any changes in moisture  content and weather. To minimize dimensional change after  installation, install Radiata Pine at a moisture content that matches  with local climate as closely as possible. If climate in a particular region  causes wood to maintain 8% to 13% moisture content annually, then the most ideal  trim would be installed at a moisture content within that range, and the  material would be stored, stickered and protected for a week to ten days prior  to application.\n  \u003cp\u003e\u003cstrong\u003eMaintenance:\u003c\/strong\u003e\u003cbr\u003e\n  With any unfinished interior wood, applying a quality finish  to all surfaces (including the ends) is recommended. An interior finish  protects the wood from moisture absorption and UV degradation, and helps  prevent any finger stains caused by touching the unfinished wood. On occasion,  the trim boards may have a mill glaze that is produced when the material is  manufactured through the planer. When mill glaze occurs, it is recommended to  remove it by sanding prior to staining or clear coating the wood. Sanding is  not recommended as a first option unless every piece is sanded. We offer a wide  selection of Water Based Interior Finishes that we can recommend based on the  final sheen level and look that is desired. Most interior finishes do not have  to be re-coated or reapplied depending on the UV exposure to your home. You can  find all of the interior stains and finish products that we carry at our  Interior Stains page\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eStorage Prior To  Application:\u003c\/strong\u003e\u003cbr\u003e\n    Until installed, all radiata pine needs protection  from direct sunlight, water saturation, snow, ice, dirt, and other elements.  Ideally, the trim boards should be stored in an enclosed building such as a  garage prior to use. It is best to store the trim boards flat and off the  ground with a vapor barrier so that moisture is not absorbed through the bottom  boards of the stack. If stored outside, the siding should be protected with a  waterproof covering elevated in the center so that water does not pool on the  cover. We also recommend that you do not completely seal the bundle, as good  air circulation is required to prevent any blue stain or molding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Twin Creeks Log Home Supply","offers":[{"title":"1x4","offer_id":40715888689211,"sku":"RPTBS4S1X4","price":2.62,"currency_code":"CAD","in_stock":true},{"title":"1x6","offer_id":40715888721979,"sku":"RPTBS4S1X6","price":3.86,"currency_code":"CAD","in_stock":true},{"title":"1x8","offer_id":40715888754747,"sku":"RPTBS4S1X8","price":5.36,"currency_code":"CAD","in_stock":true},{"title":"1x10","offer_id":40715888787515,"sku":"RPTBS4S1X10","price":6.8,"currency_code":"CAD","in_stock":true},{"title":"1x12","offer_id":40715888820283,"sku":"RPTBS4S1X12","price":8.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/1x10-1x8-1x6-trim-arrangement4cr-tclhs.jpg?v=1661549116","url":"https:\/\/www.twincreeksloghomes.com\/en-ca\/products\/radiata-pine-s4s-trim-boards","provider":"Twin Creeks Log Home Supply","version":"1.0","type":"link"}