{"product_id":"1x8-radiata-pine-primed-tongue-groove-shiplap","title":"1x8 Radiata Pine Primed Tongue \u0026 Groove Shiplap","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n \u003cp\u003e\u003cstrong\u003e Product Specifications: 1x8 Radiata Pine Primed Shiplap Siding\u003c\/strong\u003e\u003cbr\u003e\n  • \u003cstrong\u003eStack Height:\u003c\/strong\u003e 6 3\/4\"\u003cbr\u003e\n  • \u003cstrong\u003eThickness:\u003c\/strong\u003e 3\/4\" \u003cbr\u003e\n  • \u003cstrong\u003e Gap Size: \u003c\/strong\u003e1\/8\" gap on the tongue side only.\u003cbr\u003e\n  • \u003cstrong\u003eProfile: \u003c\/strong\u003eReversible Board - \"Nickel Gap\" Shiplap Face \/ Center Match Face\u003cbr\u003e\n  • \u003cstrong\u003eAvailable Length:\u003c\/strong\u003e 16'\u003cbr\u003e\n  • \u003cstrong\u003eGrade:\u003c\/strong\u003e Clear Finger-Jointed Radiata Pine - Primed \u003cbr\u003e\n  • \u003cstrong\u003eJoinery Type:\u003c\/strong\u003e Tongue and Groove.\u003cbr\u003e\n  • \u003cstrong\u003eTexture:\u003c\/strong\u003e Milled Smooth\/Primed \u003cbr\u003e\n   • \u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Stainless Steel Nail or Screw.\u003cbr\u003e\n   • \u003cstrong\u003eCutting Waste: \u003c\/strong\u003eRecommended approximately 5%-10% for walls, 15%-25% for gable ends depending on roof angle.\u003cbr\u003e\n   • \u003cstrong\u003eTypical Weight per linear foot: \u003c\/strong\u003e1 lb.\/lf \u003cbr\u003e\n   • \u003cstrong\u003eHewing Option:\u003c\/strong\u003e Hand Hewing or Draw Knifing is not available on this profile.\u003cbr\u003e\n   • \u003cstrong\u003eShipping Options: \u003c\/strong\u003eFlat-bed tractor trailer, Roll Back, LTL Carrier.  Shipping method is determined based on location and order size to minimize cost. \u003cbr\u003e\n• \u003cb\u003eDetails Disclaimer:\u003c\/b\u003e While we strive to ensure product details are always accurate, product specifications may change and images shown may not represent current dimensions.  Please call us if you would like to receive an up-to-date profile drawing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Coverage Calculations:\u003c\/strong\u003e\u003cbr\u003e\n  You can calculate the coverage for Shiplap Siding using our Tips page: \u003ca href=\"https:\/\/www.twincreeksloghomes.com\/pages\/tips#faq-estimating\" target=\"_blank\"\u003eHow Do I Determine How Much Lumber I Need?\u003c\/a\u003e Please call us if you would like a free takeoff for your project as well. \u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreparation Details:\u003c\/strong\u003e\u003cbr\u003e\n  Our 1x8 Radiata Pine Primed Shiplap Siding is ready for installation once received on your jobsite. However, wood will shrink and swell with any changes in moisture content and weather. To minimize dimensional change after installation,  install shiplap siding at a moisture content that matches with local climate as closely as possible. If climate in a particular region causes wood to  maintain 8% to 13% moisture content annually, then the most ideal shiplap siding would be installed at a moisture content within that range, and the material would be stored, stickered and protected for a week to ten days prior to application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage Prior To Application:\u003c\/strong\u003e\u003cbr\u003e\nUntil installed, all shiplap siding needs protection from direct sunlight, water saturation, snow, ice, dirt, and other elements. Ideally, the shiplap siding should be stored in an enclosed building such as a garage prior to use.  It is best to store the shiplap siding flat and off the ground with a vapor barrier so that moisture is not absorbed through the bottom boards of the stack.  If stored outside,  the siding should be protected with a waterproof covering elevated in the center so that water does not pool on the cover.  We also recommend that you do not completely seal the bundle, as good air circulation is required to prevent any blue stain or molding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Twin Creeks Log Home Supply","offers":[{"title":"Default Title","offer_id":40715899469883,"sku":"1X8RPPTGS","price":3.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/1x8-radiata-pine-primed-nickel-gap-profile-3-cr-tclhs.jpg?v=1661549403","url":"https:\/\/www.twincreeksloghomes.com\/en-ca\/products\/1x8-radiata-pine-primed-tongue-groove-shiplap","provider":"Twin Creeks Log Home Supply","version":"1.0","type":"link"}