{"title":"Stain Prep Products","description":"","products":[{"product_id":"cpr-log-cleaner","title":"CPR Log Cleaner","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003eClean and brighten logs and wood with \u003cb\u003eCPR Log Cleaner and Brightener\u003c\/b\u003e. CPR removes surface dirt and pollen, kills mold, and keeps your logs looking fresh.\u003c\/p\u003e\n\u003cp\u003eMix CPR oxygenated bleach powder with water to prepare the cleaning solution. CPR is safe to use around pets and kids.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhere to Use CPR\u003c\/b\u003e\u003cbr\u003e• Use on most any exterior wood surface (see Where Not to Use for exceptions).\u003cbr\u003e• Will not damage or discolor most building materials.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhere Not to Use CPR\u003c\/b\u003e\u003cbr\u003e• Do not use on high-tannin woods like Redwood and Douglas Fir.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCPR Log Cleaner Mixing Strength Options:\u003c\/b\u003e\u003cbr\u003e• Cleaner Strength: Use for less severe discoloration and surface cleaning. Mix 1\/2 of the container with 4 gallons of clean water in a clean 5-gallon plastic pail.\u003cbr\u003e• Brightener Strength: Use for aggressive cleaning.  Mix the entire container with 4 gallons of clean water in a clean 5-gallon plastic pail.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCPR Coverage Rate:\u003c\/b\u003e\u003cbr\u003e• At either strength, CPR solution covers between 100 and 150 square feet per gallon of mix (500-750 square feet per 5 gallons of mix), depending on the wood porosity.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eApplication Methods:\u003c\/b\u003e\u003cbr\u003e• Apply with garden sprayer, brush or mop.\u003cbr\u003e• Always test in an inconspicuous area first.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eApplication Range:\u003c\/b\u003e\u003cbr\u003e• 60 ̊-90 ̊F (do not apply to hot, sun-drenched surfaces.)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWorking Time of CPR:\u003c\/b\u003e\u003cbr\u003e1.) 5-20 minutes after application to wood.\u003cbr\u003e2.) 4-6 hours after mixing with water.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHow to Mix CPR:\u003c\/b\u003e\u003cbr\u003e• Stir thoroughly until the powder is mostly dissolved (which will take a few minutes, depending on water temperature).\u003cbr\u003e• The solution will begin to “fizz” as the powder dissolves. Not all of the powder will completely dissolve in the solution; even if all of the powder is not completely dissolved, the solution is very usable.\u003cbr\u003e• For the best and most consistent results, the solution should be used within 4 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCleaning Up:\u003c\/b\u003e\u003cbr\u003e• Clean brushes and equipment with soap and water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Guides:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/cpr-log-cleaner-info-0709.pdf\" target=\"_blank\"\u003eCPR Log Cleaner Info\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/cpr-log-cleaner-sds-0815.pdf\" target=\"_blank\"\u003eCPR Log Cleaner Safety Data Sheet (SDS) \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSashco Technical Support\u003c\/b\u003e\u003cbr\u003eIf you have questions or issues regarding the Sashco line of products, Sashco Technical Support is available at \u003ca href=\"tel:800-767-5656\"\u003e800-767-5656\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Sashco","offers":[{"title":"Default Title","offer_id":40715706499131,"sku":"CPR64","price":29.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/cpr-log-cleaner.jpg?v=1673974105"},{"product_id":"log-gevity-new-log-prep","title":"Log-Gevity New Log Prep","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e \n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003eLog-Gevity New Log Prep\u003c\/strong\u003e was developed to provide a solution for log discoloration which usually occurs during log home construction. The natural log color is lost during this phase when logs are stained by sap, insects, organic vegetation, construction dirt, airborne contaminants and general grey weathering. \u003c\/p\u003e\n          \u003cp\u003eLog-Gevity™ New Log Prep restores the wood to its original rich warm color and texture while opening the grain, enabling it to accept the initial finish coat. \u003c\/p\u003e\n          \u003cp\u003e\u003cstrong\u003eLog-Gevity New Log Prep Product Benefits\u003c\/strong\u003e\u003cbr\u003e\n •          Cleans and eliminates years of fungus growth and discoloration. \u003cbr\u003e\n • Restores wood surfaces to the appearance of new lumber.\u003cbr\u003e\n • Does not dissolve the cellulose in the wood. \u003c\/p\u003e\n          \u003cp\u003e\u003cstrong\u003eLog-Gevity New Log Prep Product Features\u003cbr\u003e\n          \u003c\/strong\u003e• Biodegradable\u003cbr\u003e\n• Environmentally friendly \u003cbr\u003e\n• Oxalic acid based \u003cbr\u003e\n• Non-corrosive \u003cbr\u003e\n• Economical concentrate\u003c\/p\u003e\n          \u003cp\u003e\u003cstrong\u003eLog-Gevity New Log Prep Coverage Rate\u003c\/strong\u003e\u003cbr\u003e\n• 150 to 250 sq. ft. per gallon \n  when diluted according to instructions. \u003cbr\u003e\n• Coverage will also vary depending \n  on the porosity of wood.\u003cbr\u003e\n• Rough sawn \n  wood will require more Log-Gevity™ New Log Prep than smooth wood. \u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eLog-Gevity New Log Prep Application \u003cbr\u003e\n• \u003c\/strong\u003eLog-Gevity New Log Prep may be applied with a brush, roller or Poly Tank Hand Pump Sprayer.\u003cbr\u003e\n          \u003cstrong\u003e• \u003c\/strong\u003eWe strongly encourage applicators to review the New Log Prep Product Guide and MSDS Sheet before using this product. \u003c\/p\u003e\n          \u003cp\u003e\u003cstrong\u003eLog-Gevity Product Notes\u003cbr\u003e\n          \u003c\/strong\u003e• In some cases bleach (sodium hypochlorite) or some other harsh, high pH chemical is used to remove the grey weathering that takes place during construction. Evidence of using an incorrect procedure to rectify this problem, will be a shiny, silver-like, membrane that when scratched, exhibits the natural log surface beneath it. In most cases, Log-Gevity™ New Log Prep is the appropriate choice to remedy this while preparing the log for its initial finish coat.\u003cbr\u003e\n          •  Log-Gevity New Log Prep is not recommended for spot cleaning. Entire elevation should be cleaned.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"ABR Products","offers":[{"title":"1 Gallon","offer_id":40715709939771,"sku":"LGLP1G","price":34.95,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":40715709972539,"sku":"LGLP5G","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/log-gevity-new-log-prep-250.jpg?v=1693326053"},{"product_id":"log-gevity-end-grain-sealer","title":"Log-Gevity End Grain Sealer","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003eLog-Gevity™ End Grain Sealer \u003c\/strong\u003eis an oil based, low VOC product that provides the ultimate protection against the intrusion of moisture and water to sawed ends of logs and lumber. Excess moisture that finds its way to cracks and voids will ultimately cause the finish to fail and encourages wood decay.\u003c\/p\u003e\n\u003cp\u003eWood decay is most likely to occur where moisture content of 25% or greater is present. The sawed ends of logs and lumber are the most susceptible to such cracks and voids due to the fact that the log has been cut open at these ends. In fact, the immersion of a butt end of a sawed log in water will increase its' total mass by 12% in less than one hour. This trapped moisture will leave your structure particularly vulnerable to decay; Log-Gevity™ End Grain Sealer has been specifically designed to counteract such moisture penetration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLog-Gevity End Grain Sealer Product Features\u003cbr\u003e• \u003c\/strong\u003eWater repellants. \u003cbr\u003e\u003cstrong\u003e• \u003c\/strong\u003eMetallic UV inhibitors and zinc borates. \u003cbr\u003e\u003cstrong\u003e• \u003c\/strong\u003eDries clear. \u003cbr\u003e\u003cstrong\u003e• \u003c\/strong\u003eCounteracts moisture intrusion preventing wood decay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLog-Gevity End Grain Sealer Coverage Rates\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• \u003c\/strong\u003eApproximately 75-100 square feet per 1 gallon (subject to age and porosity of end grain).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLog-Gevity End Grain Sealer Application Instructions \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• \u003c\/strong\u003eApply Log-Gevity End Grain Sealer liberally with a brush until the wood appears to have sufficient amount of protection.\u003cbr\u003e\u003cstrong\u003e•\u003c\/strong\u003e For best results and optimal penetration apply to dry Logs\/Wood. \u003cbr\u003e\u003cstrong\u003e• \u003c\/strong\u003eDo not apply if rain is imminently forecasted. \u003cbr\u003e\u003cstrong\u003e• \u003c\/strong\u003eSurface and Air Temperature must be above 50ºF.\u003cbr\u003e\u003cstrong\u003e• \u003c\/strong\u003eAllow at least 24 hours to dry.\u003cbr\u003e\u003cstrong\u003e• \u003c\/strong\u003eClean Up: Use mineral spirits or dish detergent and water. Should Log-Gevity End Grain Sealer come in contact with\u003cbr\u003esurfaces such as glass, paint, metal, caulking or rubber, remove immediately with dish detergent. If a spill is dry, clean it with mineral spirits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"ABR Products","offers":[{"title":"1 Gallon","offer_id":40715710038075,"sku":"LGES1G","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/log-gevity-end-grain-sealer-250.jpg?v=1693326268"},{"product_id":"log-gevity-bio-strip-gel","title":"Log-Gevity Bio Strip Gel","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e \n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003eLog-Gevity™ Bio-Strip (Mild Strength Gel) \u003c\/strong\u003eis an environmentally friendly multi-purpose stripper, cleaner, refinisher, and more. Designed for exterior use only, it is formulated to remove a wide variety of coatings from many types of substrates. This product is unique because it is biodegradable, non-flammable, non-acidic, contains no methylene chloride, and does not require neutralizing.\u003c\/p\u003e\n            \u003cp\u003e\u003cstrong\u003eLog-Gevity Bio-Strip Gel Product Features\u003c\/strong\u003e \u003cbr\u003e\n              • Biodegradable. \u003cbr\u003e\n             • Non-flammable. \u003cbr\u003e\n              • Non-acidic. \u003cbr\u003e\n              • Contains no methylene chloride. \u003cbr\u003e\n              \u003cbr\u003e\n              \u003cstrong\u003eLog-Gevity Bio-Strip Gel Product Benefits \u003c\/strong\u003e\u003cbr\u003e\n              • Does not require neutralization. \u003cbr\u003e\n              • Easy to apply through standard, air-less, paint spraying equipment. \u003cbr\u003e\n              • Water risible. \u003cbr\u003e\n              \u003cbr\u003e\n          \u003cstrong\u003eLog-Gevity Bio-Strip Gel Coverage Rate\u003cbr\u003e\n          \u003c\/strong\u003e• 50 —100 sq. ft. per gallon, depending on layers of paint to strip.\u003cstrong\u003e\u003cbr\u003e\n          \u003cbr\u003e\nLog-Gevity Bio-Strip Gel Application Instructions \u003cbr\u003e\n\u003c\/strong\u003e• Using a brush, roller, low pressure sprayer or airless paint sprayer, apply a thick coat of  Bio-Strip Gel to surface. \u003cbr\u003e\n• Allow Bio-Strip to remain on the surface until finish has dissolved. To prevent premature rinsing, wait for the entire surface to become uniformly darkened.\u003cbr\u003e\n• Scrape all dissolved residue and discard in an appropriate container. \u003cbr\u003e\n• Rinse with water ranging from garden hose pressure (which may require scrubbing) to a high pressure water rinse. On wood, adjust pressure to 500 psi or lower to avoid damage to wood fiber.\u003cbr\u003e\n• Certain types of wood surfaces may have a raised grain effect after stripping is completed, so sanding may be necessary. \u003cbr\u003e\n• Sand when surface is dry or brush with stiff bristle brush while surface is wet to smooth out any raised grain that may have occurred. \u003cbr\u003e\n• Clean up: water flush equipment, shrubbery, sidewalks, blacktop, asphalt, and other adjacent surfaces immediately upon contact.\u003cbr\u003e\n• For glass surfaces, remove all overspray and\/or residue immediately to avoid adherence to the glass surface.          \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"ABR Products","offers":[{"title":"1 Gallon","offer_id":40715710136379,"sku":"LGBS1G","price":64.95,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":40715710169147,"sku":"LGBS5G","price":260.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/log-gevity-bio-strip-gel-pail-250.jpg?v=1693326300"},{"product_id":"staples-16-oz-epoxy-wood-rebuilder","title":"Staples 16 Oz. Epoxy Wood Rebuilder","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\t\n\u003cdiv class=\"detailDescription\"\u003e\nEpoxy Wood Rebuilder is structurally stronger than most wood, and can be molded and tooled to duplicate intricate architectural detail. Epoxy Wood Rebuilder is a perfect choice for jobs where total wood replacement is impractical or where there's a desire to preserve as much original woodwork as possible. Many times stronger than regular fillers and putties, Epoxy Wood Rebuilder meets the demands of any large wood repair application. Once cured, Epoxy Wood Rebuilder can be treated just like wood. It can be nailed, drilled, planed, sawed, or sanded. Because it tightly holds nails and screws, Epoxy Wood Rebuilder is excellent for resetting stripped screws and lockset hardware as well as for repairing broken hinges, brackets, latches, etc. Simple one-to-one mixing makes Epoxy Wood Rebuilder an easy to use paste that cures to the color of natural pine. Epoxy Wood Rebuilder remains porous enough to absorb stain to match surrounding wood and can be painted or finished. Epoxy Wood Rebuilder is weatherproof and does not shrink, making it perfect for both exterior and interior use.\u003cbr\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Information:\u003c\/strong\u003e  \u003c\/p\u003e\n\u003cli\u003eNatural Wood Color.\u003c\/li\u003e\n  \u003cli\u003eAccepts stain to match surrounding woodwork.\u003c\/li\u003e\n  \u003cli\u003eNo sag, no shrink.\u003c\/li\u003e\n  \u003cli\u003eMoldable.\u003c\/li\u003e\n  \u003cli\u003eInterior and exterior.\u003c\/li\u003e\n  \u003cli\u003eEasy one to one (1:1) mixing ratio.\u003c\/li\u003e\n  \u003cli\u003eWorkable for over 30 minutes.\u003c\/li\u003e\n  \u003cli\u003eCures for service overnight.\u003cbr\u003e\n    \u003cbr\u003e\n    \u003cstrong\u003eDirections:\u003c\/strong\u003e\u003cbr\u003e\n  \u003c\/li\u003e\n  \u003cli\u003eUse separate knives to remove amount needed from jars..\u003cbr\u003e\n  \u003c\/li\u003e\n\u003cli\u003eMix equal parts of A and B on a flat surface for at least one minute until obtaining a uniform color.  \n  \u003c\/li\u003e\n\u003cli\u003eMake sure work surface is clean and dry.  \n  \u003c\/li\u003e\n\u003cli\u003eSolvents like denatured alcohol or lacquer thinner are effective to clean work area prior to application and to smooth, shape and mold epoxy.  \n  \u003c\/li\u003e\n\u003cli\u003eFor best results wait 15-20 minutes after mixing and applying.  \n  \u003c\/li\u003e\n\u003cli\u003eApply epoxy.  \n  \u003c\/li\u003e\n\u003cli\u003eEpoxy is workable for over 30 minutes and cures for  service overnight.  \n  \u003c\/li\u003e\n\u003cli\u003eHeat may be applied to speed cure, but do not subject to over 200 degrees F.  \n  \u003c\/li\u003e\n\u003cli\u003eCures to a natural light pine color.  \n  \u003c\/li\u003e\n\u003cli\u003ePaint over cured epoxy at any time.  \n  \u003c\/li\u003e\n\u003cli\u003eBefore staining, proper sanding with 100-grit or coarser sandpaper is essential.  \n  \u003c\/li\u003e\n\u003cli\u003eLet cure 12-24 hours before sanding to avoid gumming paper.\u003cbr\u003e\n    \u003cbr\u003e\n    \n    \u003cstrong\u003eWhen Repairing Rotted Wood:         \u003c\/strong\u003e\n  \u003c\/li\u003e\n\u003cli\u003eFirst, eliminate the water problem that caused the rot.\n  \u003c\/li\u003e\n\u003cli\u003eThen, completely remove all loose dry rot and treat with a consolidant such as Staples Rotted Wood Hardener before using the Wood Rebuilder.\u003c\/li\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Staples","offers":[{"title":"Default Title","offer_id":40715737890875,"sku":"STP403","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/staples-16-oz-epoxy-wood-rebuilder-400.jpg?v=1693326571"},{"product_id":"savogran-16-oz-tsp-heavy-duty-cleaner-powder","title":"Savogran 16 Oz. TSP Heavy Duty Cleaner Powder","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\t\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003eA non-sudsing powdered Trisodium Phosphate (TSP) compound that is formulated for heavy duty cleaning. Preferred by painting and cleaning professionals for removing heavy deposits of greasy grime, smoke, soot stains and chalked paint from walls, woodwork and floors. Removes mildew and mildew stains when mixed with bleach. Cleans and prepares surfaces for repainting. Also recommended for washing away paint remover sludge. \u003cbr\u003e\n  \u003cbr\u003e\nTrisodium phosphate has been used by painters for years and years as a heavy duty degreaser and all purpose cleaner. TSP is formulated for removing Grease, soot,and lead paint dust cleanup. A washing of surfaces prior to painting helps insure a good clean \"bite\" for the finish coats of paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Information:\u003c\/strong\u003e  \u003c\/p\u003e\n\u003cli\u003eThe Original deck and siding cleaner.\u003c\/li\u003e\n  \u003cli\u003eEffectively controls lead paint dust.\u003c\/li\u003e\n  \u003cli\u003eCleans surfaces in preparation for painting.\u003c\/li\u003e\n  \u003cli\u003eUse TSP to clean surfaces after using paint\/varnish removers.\u003c\/li\u003e\n  \u003cli\u003ePreferred by painting and cleaning professionals.\u003c\/li\u003e\n  \u003cli\u003eRemoves smoke and soot stains from walls.\u003c\/li\u003e\n  \u003cli\u003eCleans chalked paint.\u003c\/li\u003e\n  \u003cli\u003eEffective deck and siding cleaner.\u003cbr\u003e\n    \u003cbr\u003e\n    \u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003e\n    \u003cbr\u003e\n    Formulated for heavy duty cleaning. Removes greasy, sooty dirt and prepares previously painting surfaces for repainting.\u003cbr\u003e\n    \u003cbr\u003e\n    \u003cstrong\u003eHeavy Duty Cleaning Instructions:\u003c\/strong\u003e  \u003c\/li\u003e\n  \u003cli\u003eDissolve 1\/2 cup TSP in 2 gallons of hot water.\u003cbr\u003e\n  \u003c\/li\u003e\n\u003cli\u003eSet pail on paper to avoid ring marks.\u003cbr\u003e\n    \u003cbr\u003e\n  \n    \u003cstrong\u003eWalls \u0026amp; Woodwork Cleaning Instructions:         \u003c\/strong\u003e\n  \u003c\/li\u003e\n\u003cli\u003eSqueeze excess cleaner from sponge or cloth.\u003cbr\u003e\n  \u003c\/li\u003e\n\u003cli\u003eWash from bottom up to avoid streaking.\n  \u003c\/li\u003e\n\u003cli\u003eA second washing may be needed.  \n  \u003c\/li\u003e\n\u003cli\u003eRinse cleaned area with clean warm water.\u003cbr\u003e\n    \u003cbr\u003e\n    \n  \u003cstrong\u003eFloor Cleaning Instructions:\u003c\/strong\u003e\u003cbr\u003e\n  \u003c\/li\u003e\n\u003cli\u003eWring excess cleaner from mop or sponge and wash floor in small areas.  \n  \u003c\/li\u003e\n\u003cli\u003eRinse with clean with warm water and wipe up any excess water.  \n  \u003c\/li\u003e\n\u003cli\u003eDo not allow water or TSP to stand in puddles.\u003cbr\u003e\n    \u003cbr\u003e\n    \n    \u003cstrong\u003eHousehold Cleaning Instructions:\u003c\/strong\u003e\u003cbr\u003e\n  \u003c\/li\u003e\n\u003cli\u003eDissolve 1\/4 cup TSP in 2 gallons of hot water.\u003cbr\u003e\n    \u003cbr\u003e\n  \u003cstrong\u003eMildewed Deck Cleaning Instructions:\u003c\/strong\u003e  \n  \u003c\/li\u003e\n\u003cli\u003eRemove by washing with solution of 1 cup TSP in 3 quarts warm water and add 1 quart fresh chlorine bleach.  \n  \u003c\/li\u003e\n\u003cli\u003eUse solution to scrub area thoroughly, using scrub brush or coarse rag.  \n  \u003c\/li\u003e\n\u003cli\u003eThe bleach kills fungus growth and removes stains.   \n  \u003c\/li\u003e\n\u003cli\u003eTSP removes dirt and grime and wets surface so bleach can work.  \n  \u003c\/li\u003e\n\u003cli\u003eIf stains remain use second application.   \n  \u003c\/li\u003e\n\u003cli\u003eWhen mildew is gone, rinse thoroughly with clean warm water and dry surface completely before painting.   \n  \u003c\/li\u003e\n\u003cli\u003eThis solution will not stop future mildew growth.\u003cbr\u003e\n   \n\u003c\/li\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Savogran","offers":[{"title":"Default Title","offer_id":40715738120251,"sku":"SAV10621","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/savogran-tsp-1lb-powder-tclh-350.jpg?v=1661547333"},{"product_id":"savogran-liquid-tsp-substitute-heavy-duty-cleaner","title":"Savogran Liquid TSP Substitute Heavy Duty Cleaner","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003eA heavy duty all-purpose cleaner that cuts through and removes heavy deposits of greasy dirt and grime from interior and exterior surfaces. One gallon of Liquid TSP Substitute will make up to 16 gallons of cleaning solution (cleans approx. 6400 sq. ft.) and requires no rinsing. Recommended for walls, woodwork, ceilings, concrete, metal, vinyl and aluminum siding. Removes mildew stains when mixed with bleach. Can be applied by hand or with a pressure washer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cli\u003eHeavy duty phosphate-free formula\u003c\/li\u003e\n\u003cli\u003eConcentrated solution - lasts longer!\u003c\/li\u003e\n\u003cli\u003eRequires no rinsing\u003c\/li\u003e\n\u003cli\u003eExcellent for preparing surfaces before painting\u003c\/li\u003e\n\u003cli\u003eWorks with power washers\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eAll good paint jobs begin with a good cleaning to prepare the surface. A properly prepared surface will improve paint application and adhesion. Removes mildew stains when mixed with bleach. \u003cbr\u003e\u003cbr\u003eThe product can be applied by hand or with a pressure washer. Liquid TSP is a concentrated product-one gallon of Liquid TSP will make up to 16 gallons of cleaning solution and clean approximately 6400 sq. ft.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eGeneral Cleaning Instructions:\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdd 8 ounces of TSP per gallon of water.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse a clean sponge or cloth, squeeze out excess solution and wash surface from bottom up to prevent streaking.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eHeavy Duty Cleaning Instructions: \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdd 16 oz of TSP per gallon of water.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse a nylon scrubbing brush or pad dipped in solution to scrub area.\u003c\/li\u003e\n\u003cli\u003eDamp wipe area using a clean sponge or cloth and fresh cleaning solution.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eMildew stains Cleaning Instructions:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemove by washing with solution of 16 oz TSP per gallon warm water with one quart chlorine bleach added.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003ePressure Washer Cleaning Instructions:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdd full strength to detergent reservoir or place pressure washer tube directly into TSP container.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFormulated for injector dilution ratios up to 16:1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNote: TSP Substitute will not harm vegetation. Before and after using product, spray fine mist of fresh water on vegetation. Runoff is not harmful to plants.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cp\u003e\u003cb\u003eAdditional Resources:\u003c\/b\u003e\u003cbr\u003e\n  • \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/savogran-tsp-liquid-sub-sds-1116-tclhs.pdf?v=1769535084\" target=\"_blank\"\u003eLiquid TSP Safety Data Sheet \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Savogran","offers":[{"title":"1 Quart","offer_id":41225752674363,"sku":"SAV10632","price":7.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":41225752707131,"sku":"SAV10633","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/savogran-liquid-tsp-substitute-1-quart-tclhs-750.jpg?v=1682968823"},{"product_id":"permachink-log-wash-1-gallon","title":"Perma-Chink Log Wash - 1 Gallon","description":"\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log Wash\u003c\/strong\u003e is a liquid concentrate for cleaning log and wood surfaces. It can be used as a maintenance cleaner or to prepare the surface of wood for a new coat of stain or topcoat.\u003c\/p\u003e\n\u003cp\u003eFor preparing the surface of bare wood for a new coat of stain, Log Wash removes dirt, grime, pollen, and surface mold and mildew without harming the wood or the finish. As opposed to bleach solutions, Log Wash does not upset the natural pH balance of the wood, thus preventing wood fiber damage and iron tannate stains. (To treat gray, UV-exposed wood, see Permachink Wood Renew).\u003c\/p\u003e\n\u003cp\u003eThe exterior of a log home are a settling ground for dust, pollen and other airborne contaminants that dull the surface and encourage mold growth. A light cleaning once or twice a year will keep a home looking beautiful and helps prolong the life of the exterior wood finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log Wash Features and Benefits:\u003c\/strong\u003e\u003cbr\u003e• Gently Cleans Bare and Finished Wood.\u003cbr\u003e• Safe for Log Chinking and Sealants.\u003cbr\u003e• Environmentally Friendly.\u003cbr\u003e• Removes Dust, Pollen, Dust, and Pollution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecial Notes:\u003c\/strong\u003e\u003cbr\u003e• Do not allow Log Wash solutions to dry on the wall.\u003cbr\u003e• Avoid streaks by applying Log Wash from the bottom of the wall upward.\u003cbr\u003e• Rinse Log Wash from the top of the wall downward. Always use the proper strength solution for your application.\u003cbr\u003e• Pressure washers can damage existing finishes – rinse carefully using the mist setting on your garden hose for best results.\u003cbr\u003e• Log Wash is not suitable for removing existing finishes or removing severe discoloration from weathering, tannate stains, water stains, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink Log Wash Coverage:\u003c\/strong\u003e\u003cbr\u003e• Log Wash concentrate should be diluted with water before use. \u003cbr\u003e• Regardless of the concentration strength used, each gallon of the diluted solution should clean 150 - 250 sf of wall surface.\u003cbr\u003e• \u003cb\u003eMaintenance Cleaner Strength\u003c\/b\u003e: 1 cup \/ gallon of water, which makes 16 gallons of diluted solution. This should yield 2,400 - 4,000 sf of cleaning coverage per gallon of concentrate.\u003cbr\u003e• \u003cb\u003eStain Preparation Strength\u003c\/b\u003e: 2 cups \/ gallon of water, which makes 8 gallons of diluted solution. This should yield 1,200 - 2,000 sf of cleaning coverage per gallon of concentrate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log Wash Mixing Instructions\u003c\/strong\u003e: \u003cbr\u003e• Mix Log Wash with water according to the following specific instructions. To avoid damage to the surface, be sure to use the proper concentration for the job that you are performing.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e-As a maintenance cleaner for finished wood:\u003c\/em\u003e\u003cbr\u003e• Add one (1) cup of Log Wash to one (1) gallon of water and mix thoroughly.\u003cbr\u003e• To avoid harming finish, never add more than one cup per gallon of water. \u003cbr\u003e• For wetting and rinsing, use a mist setting on your garden hose nozzle to avoid harming your finishes. \u003cbr\u003e• Do not use pressure washers on existing finishes for maintenance cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e-As stain preparation cleaner over bare or previously stained wood:\u003c\/em\u003e\u003cbr\u003e• Add two (2) cups of Log Wash to one (1) gallon of water and mix thoroughly. \u003cbr\u003e• This stronger solution is suitable for cleaning bare or previously stained wood surfaces before application of a new coat of Lifeline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log Wash Application Instructions:\u003c\/strong\u003e\u003cbr\u003e• Clean only as much surface as you can manage without letting the Log Wash solution dry on the wall. \u003cbr\u003e• Start by completely wetting the surface with mist setting on your hose.\u003cbr\u003e• Apply Log Wash solution with a pump-up sprayer starting at the bottom of the wall and working upward.\u003cbr\u003e• Leave Log Wash on the wall for 5 to 15 minutes. If necessary, scrub with a soft bristle brush to remove stubborn dirt.\u003cbr\u003e• Rinse thoroughly starting at the top of the area, working downward. \u003cbr\u003e• Clean up spilled Log Wash with plenty of fresh water. \u003cbr\u003e• Note: Rinse Log Wash off plants and shrubberies as soon as possible to avoid damage to them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"Default Title","offer_id":40715806015547,"sku":"LW1","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/log-wash-1-gallon.jpg?v=1661548262"},{"product_id":"perma-chink-uv-boost-stain-additive","title":"Perma-Chink UV Boost Stain Additive","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink UV Boost\u003c\/strong\u003e is a concentrated water-based liquid stain additive that contains a new technology ultraviolet light inhibitor.\u003c\/p\u003e\n\u003cp\u003eSome regions of the country such as the Southeast, Southwest and higher altitude areas are subject to high intensity sunlight. Over time the ultraviolet light in sunlight darkens the lignin component of wood.\u003c\/p\u003e\n\u003cp\u003eWhen added to the first coat on bare wood of any Lifeline wood finish, UV Boost combines with the lignin to delay the wood beneath the stain from graying. Since the concentration of the active components differ, be sure to use the appropriate size for the amount of stain or finish you are using.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003ePerma Chink UV Boost Features \u0026amp; Benefits:\u003c\/strong\u003e\u003cbr\u003e • Contains a new technology ultraviolet light inhibitor.\u003cbr\u003e • Water-based.\u003cbr\u003e • Non-toxic.\u003cbr\u003e • Low Odor.\u003cbr\u003e • Included in Lifeline Ultra-2 and Ultra-7 wood finishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink UV Boost Stain Additive Resources:\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/perma-chink-uv-boost-sds-0922-tclhs.pdf?v=1769528938\" target=\"_blank\"\u003eMSDS Sheet - UV Boost Stain Additive\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-video\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Perma-Chink","offers":[{"title":"120 ml - 1 Gallon Treatment","offer_id":40715807195195,"sku":"UVB1","price":16.99,"currency_code":"USD","in_stock":true},{"title":"240 ml - 5 Gallon Treatment","offer_id":40715807227963,"sku":"UVB5","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/uv-boost-5-gallon-treatment.jpg?v=1661548269"},{"product_id":"permachink-log-end-seal-1-gallon-pail","title":"Perma-Chink Log End Seal - 1 Gallon Pail","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log End Seal – End Grain Sealer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"detailDescriptionRed\"\u003e\u003cstrong\u003eFree Ground Shipping\u003c\/strong\u003e\u003cbr\u003eWe are offering free shipping for 1 gallon pails of this product shipping to the Lower 48 United States. Offer does not apply to Alaska, Hawaii, and the US Territories. Free Shipping applies to this item only and not the entire order.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLog End Seal\u003c\/strong\u003e is designed to protect exposed log ends from deterioration due to the elements. Sunlight, wind, rain, snow, and ice all play a role in degrading wood surfaces. This is especially true for log ends where the end grain is exposed and cracks and checks are prone to develop. Even if the ends are coated with a quality stain, the exposed end grain of the wood acts like small straws drawing water into the log. This gives rot and decay an opportunity to start. If left unprotected, log or log corner replacement may eventually be required.\u003c\/p\u003e\n\u003cp\u003eLog End Seal is a clear finish that prevents water from penetrating into log ends thus providing a layer of protection against sun, wind, and weather damage.\u003c\/p\u003e\n\u003cp\u003eFor use exclusively with PermaChink Lifeline wood finishes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log End Seal Application Methods:\u003c\/strong\u003e\u003cbr\u003e• Brush\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log End Seal Coverage Rate:\u003c\/strong\u003e\u003cbr\u003e• 30-40 square feet \/ gallon or 180 x 6\" log ends\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log End Seal Application Instructions:\u003c\/strong\u003e\u003cbr\u003e• Application temperature is between 40° F to 90° F.\u003cbr\u003e• Use Log End Seal as needed depending on the climate and weather exposure.\u003cbr\u003e\u003cbr\u003e1. Thoroughly sand all exposed log ends, taking care not to leave heavy sanding marks or gouges.\u003cbr\u003e2. Apply any Lifeline™ brand exterior stain to the entire home, including the log ends.\u003cbr\u003e3. When the Lifeline stain has dried, apply Log End Seal with a brush, pad or trowel taking care to completely cover the exposed log end. Try to avoid leaving brush marks or uncoated areas on the ends. Wipe off any excess that may have worked its way onto the sides of the logs.\u003cbr\u003e4. Let the Log End Seal dry and finish with a Lifeline topcoat over the entire home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log End Seal Special Instructions:\u003c\/strong\u003e\u003cbr\u003e• Apply Lifeline stain to the entire home, including the log ends. \u003cbr\u003e• When the Lifeline has dried, apply Log End Seal with a brush, taking care to completely cover the exposed log end. Wipe off any extra that may have worked its way onto the sides of logs.\u003cbr\u003e• Apply Log End Seal before applying Lifeline clear topcoat.\u003cbr\u003e• Wash equipment and brushes with a soap and warm water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log End Seal Clean Up \u0026amp; Drying Time:\u003c\/strong\u003e\u003cbr\u003e• Wash equipment and brushes with soap and warm water. \u003cbr\u003e• Dried Log End Seal may be removed with alcohol.\u003cbr\u003e• Dry to the touch in 1-3 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink Log End Seal Shelf Life:\u003c\/strong\u003e\u003cbr\u003e• Log End Seal has a shelf life of 1 year.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"Default Title","offer_id":40715812831291,"sku":"LES","price":140.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/23-log-end-seal-gallon-pc-400_1.jpg?v=1661548301"},{"product_id":"savogran-12-oz-oxalic-acid-wood-bleach","title":"Savogran 12 Oz. Oxalic Acid Wood Bleach","description":"\u003c!-- Start Twin Creeks Log Home Supply copy --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003eSavogran Concentrated Wood Bleach®\u003c\/strong\u003e contains oxalic acid which, when mixed with hot water, effectively bleaches unfinished or stripped wood quickly and easily. Wood Bleach is excellent for removing black water spots and tannin stains in wood. Use on all unfinished woodwork, floors, doors, etc. to lighten wood or match different wood colors.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eSavogran Concentrated Wood Bleach Features \u0026amp; Benefits\u003c\/strong\u003e\u003cbr\u003e\n  • Bleaches uncoated wood.\u003cbr\u003e\n  • Removes black water spots and stains.\u003cbr\u003e\n  • Use to gently lighten wood for color matching.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eSavogran Concentrated Wood Bleach Usage\u003c\/strong\u003e\u003cbr\u003e\n• For use on all unfinished woodwork, floors, and doors.\u003c\/p\u003e  \n\u003cp\u003e\u003cstrong\u003eSavogran Concentrated Wood Bleach Preparation Instructions\u003c\/strong\u003e\u003cbr\u003e\n• Protect eyes with goggles and wear rubber gloves.\u003cbr\u003e  \n  • Protect skin from splashes.\u003cbr\u003e\n• Wood must be free of paint, varnishes and waxes.\u003cbr\u003e\n  • Protect surrounding surfaces.\u003cbr\u003e\n• Immediately rinse from glass.\u003cbr\u003e\n• Do not mix with chlorine bleach or other chemicals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSavogran Concentrated Wood Bleach Application Instructions\u003c\/strong\u003e:  \u003cbr\u003e\n• Bleaching:  Dissolve contents of package in one gallon of hot water or 3oz. (a generous teaspoon) per one quart of hot water.\u003cbr\u003e\n• Deck Brightening:  Dissolve contents of package in four gallons of water.\u003cbr\u003e\n• Apply solution with scrub brush.\u003cbr\u003e\n• Apply repeatedly every 10 minutes until desired lightness is achieved.\u003cbr\u003e\n• Triple rinse repeatedly with clean water and allow to dry.\u003cbr\u003e\n• If topcoating with a waterbase finish, rinse with a solution of one tablespoon baking soda per one gallon of water.\u003cbr\u003e\n• Surface must be clean and dry before refinishing or new finish may not adhere.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- End Twin Creeks Log Home Supply copy --\u003e","brand":"Savogran","offers":[{"title":"Default Title","offer_id":40715824201787,"sku":"SAV10501","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/savogran-oxalic-acid-wood-bleach-tclhs.jpg?v=1661548362"},{"product_id":"e-wood-epoxy-wood-filler","title":"Perma-Chink E-Wood Epoxy Wood Filler","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Putty \u003c\/strong\u003e- For filling voids in decayed wood, E-Wood is the perfect product to use. E-Wood is a two component epoxy wood putty that may be used to fill in wood voids. It can be textured to match the appearance of the surrounding wood. Hardened E-Wood filler can be sanded, shaped and stained.\u003c\/p\u003e\n\u003cp\u003eE-Wood is a putty-like, non-shrinking, epoxy filler used to fill in missing sections of logs or dimensional wood members. E-Wood will form a permanent bond to most rigid surfaces. Porous surfaces should always be treated with a compatible, low viscosity epoxy system such as M-Balm.\u003c\/p\u003e\n\u003cp\u003eUse E-Wood to replace missing sections of window sills, frames, furniture, or any wood structure. Use it to add new sections to completed structures. After repair with E-Wood, restored wood can be shaped with your normal wood working tools, including saws, sanders, planes, routers and drills.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Features \u0026amp; Benefits:\u003c\/strong\u003e\u003cbr\u003e • Restores strength to deteriorated wood.\u003cbr\u003e • Does not shrink.\u003cbr\u003e • Can be sawed, drilled, routed, nailed, screwed, painted and stained.\u003cbr\u003e • E-Wood will form a permanent bond to most rigid surfaces.\u003cbr\u003e • Two component wood tone epoxy putty.\u003cbr\u003e • May be shaped, molded and textured to match the surrounding wood.\u003cbr\u003e • Soft or decayed wood should be consolidated with M-Balm first.\u003cbr\u003e • Hardens within 24 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Special Note:\u003c\/strong\u003e\u003cbr\u003e • Porous surfaces should first be coated with M-Balm.\u003cbr\u003e • Use E-Wood to replace missing sections of windowsills, frames, furniture, or any wood structure. \u003cbr\u003e • Use it to add new sections to already completed structures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Resources:\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/e-wood-part-a-sds-10-15.pdf\" target=\"_blank\"\u003eSDS Sheet - E-Wood Part A\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/e-wood-part-b-sds-10-15.pdf\" target=\"_blank\"\u003eSDS Sheet - E-Wood Part B\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink E-Wood Putty Package Contents:\u003c\/strong\u003e\u003cbr\u003e 32 Oz. Box:\u003cbr\u003e • (1) 16 Oz. Bottle Epoxy (Part A)\u003cbr\u003e • (1) 16 Oz. Bottle Hardener (Part B)\u003cbr\u003e \u003cbr\u003e 2 Gallon Kit:\u003cbr\u003e • (1) 1 Gallon Jug Epoxy (Part A)\u003cbr\u003e • (1) 1 Gallon Jug Hardener (Part B)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Application Methods \u0026amp; Rates:\u003c\/strong\u003e\u003cbr\u003e • Press into voids using gloved hands.\u003cbr\u003e • Putty knife or trowel.\u003cbr\u003e • 1.8 cubic inches per ounce mixed A\u0026amp;B components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Application Information \u0026amp; Technique:\u003c\/strong\u003e\u003cbr\u003e • Application temperature is between 40° F to 90° F.\u003cbr\u003e • Apply E-Wood on clean and dry surface that was restored with M-Balm.\u003cbr\u003e • With disposable gloves on both hands, knead together one part of E-Wood Epoxy (Part A) with one part E-Wood Hardener (Part B) by volume. Mix no more than can be applied within 15 minutes.\u003cbr\u003e • Apply over wood that has been treated and sealed with M-Balm. Mold to a rough finished shape.\u003cbr\u003e • When cured, E-Wood can be sawed, nailed, carved, machined and sanded. E-Wood can tinted or painted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Clean Up \u0026amp; Drying Time:\u003c\/strong\u003e\u003cbr\u003e • Uncured mixed E-Wood (Part A and Part B) may be cleaned up with white vinegar then flushed with water.\u003cbr\u003e • E-Wood hardens in 12 to 24 hours depending on temperature.\u003cbr\u003e • E-Wood cures slower in low temperatures. (Never change mixing ratio to compensate for temperature.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Shelf Life:\u003c\/strong\u003e\u003cbr\u003e • E-Wood has a shelf life of 1 year. \u003cbr\u003e • Do not freeze!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Safety Precautions:\u003c\/strong\u003e\u003cbr\u003e • Always wear protective disposable gloves when using this product. \u003cbr\u003e • Avoid skin contact. \u003cbr\u003e • Skin sensitization may result from prolonged and repeated contact. \u003cbr\u003e • If use causes soreness, redness, blistering, or other symptoms of irritation, stop use and see a physician immediately. \u003cbr\u003e • Use with adequate ventilation.\u003cbr\u003e • If eye contact occurs, flush with large quantities of water and contact a physician immediately. \u003cbr\u003e • Do not use around open flame. \u003cbr\u003e • If Part A is swallowed, induce vomiting.\u003cbr\u003e • If Part B is swallowed, do not induce vomiting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"32 Oz. Box","offer_id":40715834720315,"sku":"EWOOD32","price":54.99,"currency_code":"USD","in_stock":true},{"title":"(2) 1 Gallon","offer_id":40715834753083,"sku":"EWOOD2","price":264.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/e-wood-epoxy-32-oz-tclhs_1.jpg?v=1661548566"},{"product_id":"m-balm-liquid-wood-epoxy","title":"Perma-Chink M-Balm Liquid Wood Epoxy","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink M-Balm Epoxy Wood Consolidator:\u003c\/strong\u003e\u003cbr\u003e Wood that has lost its integrity due to decay or insects can be hardened and consolidated with M-Balm. This two-component liquid epoxy penetrates into soft, porous or spongy wood to form a strong water-resistant mass. M-Balm should always be used in preparation for filling pockets of decayed wood with E-Wood epoxy putty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink M-Balm Epoxy Features \u0026amp; Benefits:\u003c\/strong\u003e\u003cbr\u003e • Penetrates deeply into deteriorated and rotted wood, creating a strong, solid base for restoration.\u003cbr\u003e • Two component liquid epoxy.\u003cbr\u003e • Low viscosity for penetration into soft, spongy and porous wood.\u003cbr\u003e • Forms a hard, water resistant mass.\u003cbr\u003e • Excellent for both interior and exterior use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e\u003cbr\u003e • Squeeze bottle\u003cbr\u003e • Syringe\u003cbr\u003e • Small brush\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink M-Balm Resources:\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/perma-chink-m-balm-part-a-sds-1023-tclhs.pdf?v=1769527855\" target=\"_blank\"\u003eSDS Sheet - M-Balm Part A\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/perma-chink-m-balm-part-b-sds-1023-tclhs.pdf?v=1769527894\" target=\"_blank\"\u003eSDS Sheet - M-Balm Part B\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/perma-chink-m-balm-epoxy-tds-1125-tclhs.pdf?v=1769527688\" target=\"_blank\"\u003eM-Balm Technical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink M-Balm Epoxy Application Instructions \u0026amp; Technique:\u003c\/strong\u003e\u003cbr\u003e • Application temperature is between 40° F to 90° F.\u003cbr\u003e • Mix two parts of M-Balm Epoxy (Part A) with one part of M-Balm Hardener (Part B) by volume. \u003cbr\u003e • Mix no more that can be applied within 30 minutes. \u003cbr\u003e • For easy measurement, use mixing\/applicator squeeze bottle.\u003cbr\u003e • Apply to affected area with mixing\/applicator squeeze bottle, syringe, brush or roller. \u003cbr\u003e • Apply only to dry wood. The wood must be very dry (15% moisture content or less). \u003cbr\u003e • Repeat if necessary.\u003cbr\u003e • In extreme cases of deep rot, drill a series of holes into the decayed area and pour liberally into the affected area. \u003cbr\u003e • Allow time for M-Balm to soak well into the area.\u003cbr\u003e • Repeat if necessary.\u003cbr\u003e • M-Balm coverage rate depends on porosity of wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink M-Balm Epoxy Package Contents:\u003c\/strong\u003e\u003cbr\u003e 24 Oz. Box:\u003cbr\u003e • (1) 16 Oz. Bottle Epoxy (Part A)\u003cbr\u003e • (1) 8 Oz. Bottle Hardener (Part B)\u003cbr\u003e • (1) 8 Oz. Mixing\/Applicator Squeeze Bottle\u003cbr\u003e \u003cbr\u003e 1.5 Gallon Kit:\u003cbr\u003e • (1) 1 Gallon Jug Epoxy (Part A)\u003cbr\u003e • (1) ½ Gallon Jug Hardener (Part B)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink M-Balm Epoxy Drying Time \u0026amp; Cleanup:\u003c\/strong\u003e\u003cbr\u003e • Uncured mixed M-Balm (Part A and Part B) may be cleaned up with white vinegar then flushed with water.\u003cbr\u003e • M-Balm Epoxy dries between 12 to 24 hours. \u003cbr\u003e • Do not allow to dry on wall.\u003cbr\u003e • M-Balm cures slower in low temperatures. (Never change mixing rates to compensate for temperature.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink M-Balm Epoxy Shelf Life:\u003c\/strong\u003e\u003cbr\u003e • M-Balm has a shelf life of 1 year. \u003cbr\u003e • Do not freeze!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink M-Balm Epoxy Safety Precautions:\u003c\/strong\u003e\u003cbr\u003e • Always wear protective disposable gloves when using this product. \u003cbr\u003e • Avoid skin contact. Skin sensitization may result from prolonged and repeated contact. \u003cbr\u003e • If use causes soreness, redness, blistering, or other symptoms of irritation, stop use and see a physician immediately. Use with adequate ventilation.\u003cbr\u003e • If eye contact occurs, flush with large quantities of water and contact a physician immediately. Do not use around open flame.\u003cbr\u003e • If Part A is swallowed, induce vomiting.\u003cbr\u003e • If Part B is swallowed, do not induce vomiting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"24 Oz. Box","offer_id":40715835080763,"sku":"MBALM24","price":59.99,"currency_code":"USD","in_stock":true},{"title":"1.5 Gallon Kit","offer_id":40715835113531,"sku":"MBALM1","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/m-balm-24-oz-tclhs.jpg?v=1661548572"},{"product_id":"perma-chink-s-100-finish-remover","title":"Perma-Chink S-100 Finish Remover","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink S-100  Finish Remover\u003c\/strong\u003e is an environmentally friendly water-based solvent that removes many oil and water-borne finishes from logs, siding, and decks.  Perma-Chink Systems developed a finish remover using new technology originally developed for removing paint from aluminum aircraft surfaces.\u003c\/p\u003e\n\u003cp\u003eSupplied as a ready-to-use gel, it is easily applied with a short bristled brush, paint roller, or airless sprayer. Within a few minutes it begins to soften the finish and since it is a gel, it stays wet and active for a fairly long period of time. Once the finish has sufficiently softened, it can be removed by simply pressure washing.\u003c\/p\u003e\n\u003cp\u003eS-100 will not darken or discolor the wood, will not corrode or discolor metal surfaces, nor will it harm log home chinking or sealants.  Although it is effective for removing most log home finishes, there are some high performance coatings that may require a more aggressive chemical stripper.  Perma-Chink Systems recommends that a sample of S-100 be obtained from them and tested on the finish you want to remove prior to placing an order.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003e Features \u0026amp; Benefits\u003c\/strong\u003e\u003cbr\u003e\n  • Removes most finishes from logs, siding and deck surfaces.\u003cbr\u003e\n• Works exceptionally well against \"Proguard\" and Linseed Oil based products. \u003cbr\u003e\n  • Will not harm chinking and sealants.\u003cbr\u003e\n  • Will not corrode or discolor aluminum or other metals.\u003cbr\u003e\n  • Environmentally friendly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Coverage Rate\u003c\/strong\u003e\u003cbr\u003e\n  • Coverage will be approximately 50 to 100 square feet per gallon depending on the surface texture.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003ePreparation Information\u003c\/strong\u003e\u003cbr\u003e\n  • Although S-100 is not nearly as corrosive as many commonly used finish removers, be sure to wear a long sleeved shirt, rubber gloves and eye protection during use.\u003cbr\u003e\n  • If exposed, flush eyes with water and wash skin with soap and water. Rinse down plants, shrubs, and grass with plenty of water if S-100 comes in contact with them.\u003cbr\u003e\n  • Equipment: Safety equipment, bucket, brush or roller, paint scraper, rags, and a pressure washer capable of generating at least 500 to 600 psi. \u003cbr\u003e\n  • For the most efficient removal of the finish, use a pressure washer with an output of three gallons per minute or greater and a 15 degree fan tip nozzle.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eSpecial Instructions\u003c\/strong\u003e \u003cbr\u003e\n  • Apply from bottom-up, rinse from top-down.\u003cbr\u003e\n  • One to two applications, depending on severity.\u003cbr\u003e\n  • Rinse thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Instructions\u003c\/strong\u003e\u003cbr\u003e\n  • S-100 works best when applied at temperatures between 50°F and 90°F and try to avoid working in direct sunlight. \u003cbr\u003e\n  • Work on small sections (50 square feet or so) at a time. \u003cbr\u003e\n  • Apply a generous amount of S-100 to the wood surface using a brush or roller. \u003cbr\u003e\n  • If removing a finish from a wall, start at the bottom of the wall and work your way up.\u003cbr\u003e\n  • Allow the S-100 to remain on the surface for at least 20 minutes. \u003cbr\u003e\n  • In cooler weather it may take up to a couple of hours for the finish to soften. If it starts to dry out, lightly mist it with water to keep it active.\u003cbr\u003e\n  • Once the finish has softened, remove it with a pressure washer. On walls pressure wash starting at the bottom of the area and work your way up. \u003cbr\u003e\n  • If there are spots where pressure washing has not removed all of the finish,  try scraping off the remaining finish with a paint scraper while the finish is still soft. \u003cbr\u003e\n  • Protected areas under porch roofs, soffits, etc. may need a second application to remove all of the finish.\u003cbr\u003e\n  • Once the finish removal process is completed, be sure to thoroughly rinse the surface from the top down in order to remove any S-100 residue and return the wood to its proper pH balance. Use pH Strips to verify adequate rinsing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up \u0026amp; Shelf Life\u003c\/strong\u003e\u003cbr\u003e\n• Use soap and water to clean tools and equipment.\u003cbr\u003e\n• S-100 has a 1 year shelf life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Resources\u003c\/strong\u003e\u003cbr\u003e\n  \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/perma-chink-s-100-sds-0722-tclhs.pdf?v=1769528594\" target=\"_blank\"\u003eS-100 Finish Remover Safety Data Sheet\u003c\/a\u003e\u003cbr\u003e\n  \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/applying-finish-removers-tt.pdf\" target=\"_blank\"\u003eApplying S-100 With an Airless Sprayer\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"5 Gallon","offer_id":40715835605051,"sku":"S1005G","price":274.99,"currency_code":"USD","in_stock":true},{"title":"10 Oz. Sample Jar","offer_id":40715835637819,"sku":"S100S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/s-100-5-gallon-tclhs-b.jpg?v=1661548579"},{"product_id":"stripit-finish-remover-for-log-homes","title":"StripIt Finish Remover for Log Homes","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003eStripIt Finish Remover ® \u003c\/strong\u003e is a water based, environmentally friendly stain and finish remover for use on log homes. This product does not contain any hazardous methylene chloride, methanol, caustic or petroleum solvents. StripIt® is practically odor free, is non-flammable and biodegradable. StripIt® can be safely used on interior and exterior surfaces. In addition to its use on log homes, StripIt can also be used on concrete, brick, stone, metal, fiberglass and other surfaces too. Use StripIt® to remove multiple coats of wood stain and finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStripIt Finish Remover Features \u0026amp; Benefits\u003c\/strong\u003e\u003cbr\u003e • Removes most finishes from logs, siding and deck surfaces.\u003cbr\u003e • Will not harm chinking and sealants.\u003cbr\u003e • Will not corrode or discolor aluminum or other metals.\u003cbr\u003e • Environmentally friendly.\u003cbr\u003e • Water Clean Up.\u003cbr\u003e • Interior or Exterior Use.\u003cbr\u003e • Removes All Stains \u0026amp; Finishes.\u003cbr\u003e • Removes Perma-Chink Ultra-2 and Lifeline Advance Topcoat products exceptionally well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStripIt Finish Remover Application Methods\u003c\/strong\u003e\u003cbr\u003e • Safety equipment, airless sprayer, brush or roller, paint scraper, rags, and pressure washer capable of generating at least 500 to 600 psi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStripIt Finish Remover Coverage Rate\u003c\/strong\u003e\u003cbr\u003e • Approximately 40-55 square feet per gallon.\u003cbr\u003e • Coverage rates will vary depending upon surface and application method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStripIt Finish Remover Resources\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/perma-chink-stripit-sds-0522-tclhs.pdf?v=1769528813\" target=\"_blank\"\u003eMSDS - StripIt Finish Remover for Log Homes\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/applying-finish-removers-tt.pdf\" target=\"_blank\"\u003eApplying Strip-It With an Airless Sprayer\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStripIt Finish Remover Special Instructions\u003c\/strong\u003e\u003cbr\u003e • Apply from bottom-up, rinse from top-down.\u003cbr\u003e • One to two applications, depending on severity.\u003cbr\u003e • Rinse thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStripIt Finish Remover Application Instructions\u003c\/strong\u003e\u003cbr\u003e • StripIt® does not require neutralization.\u003cbr\u003e • Before general use, it is imperative to test on a small, inconspicuous area to determine compatibility, required dwell time, coverage and desired results. \u003cbr\u003e • The end user shall determine the suitability of the product for its intended use(s), and user assumes all risk and liability whatsoever in connection therewith.\u003c\/p\u003e\n\u003cp\u003e1. Cover\/protect\/mask areas with plastic sheeting where removal is not required. Cover plants and vegetation. Please read lead paint warning on this label before removing any paint. Workers must wear impervious gloves, apron, footwear and safety goggles while using StripIt®. Take wind drift into consideration if spraying.\u003c\/p\u003e\n\u003cp\u003e2. StripIt® is a ready to use product. Do not dilute.\u003c\/p\u003e\n\u003cp\u003e3. Apply using brush, roller or airless sprayer, at a thickness of 30-35 mils. Two passes will be necessary to achieve required thickness when applying with an airless sprayer. All filters must be removed when applying with an airless sprayer. The recommended tip size for airless sprayer applications is #521. When applying with an airless sprayer, begin application at the bottom and work up. Do not apply thin. Applying thin may result in an additional product application. Air and surface temperatures should be between 55F - 90F for best results. Lower temperatures may require increased dwell time. Higher temperatures and hot surfaces might dry out the remover. If necessary, cover remover with StripIt Paper or plastic to prevent drying when working in direct sunlight and air temperature is 90F or higher. 4. Removal requires a minimum of several hours for low solids stains and finishes, to 24 hours for high solids, multiple layer removals. Some removals might require several days of dwell time. Do not allow StripIt® to dry. If product begins to dry, re-apply StripIt® and cover with StripIt® Paper or plastic.\u003c\/p\u003e\n\u003cp\u003e5. Once stain\/finish has softened and lifted, remove using a scraper, putty knife or pressure washer. If using a pressure washer to remove stain\/finish\/remover residue, start at the bottom and work up. You do not want to wash away the Remover from areas that are not ready for removal. Hold the pressure washer wand at a 30-45 degree angle from the wall. The objective is to “peel” the softened finish from the surface, and not to blast it off with a lot of water pressure. This will help avoid gouging the surface and severe feathering. If there are some remaining spots of finish, try scraping these areas with a paint scraper or a stiff nylon brush before they dry.\u003c\/p\u003e\n\u003cp\u003e6. Thoroughly rinse surface to remove any remaining residue. Collect all remover waste and stain\/finish residue for proper disposal in accordance with all government regulations.\u003c\/p\u003e\n\u003cp\u003e7. Allow surface to thoroughly dry before applying stain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStripIt Finish Remover Clean Up\u003c\/strong\u003e\u003cbr\u003e • Clean all applicators and equipment with soap and water or denatured alcohol. \u003cbr\u003e • Do not store or collect removed paint or residue in metal containers. \u003cbr\u003e • Use plastic containers only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink StripIt Storage \u0026amp; Shelf Life\u003c\/strong\u003e\u003cbr\u003e • Close container after each use. \u003cbr\u003e • Keep away from heat sources and temperatures below 32 degrees F. \u003cbr\u003e • Shelf life is 36 months in original, closed containers in ambient temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"5 Gallon","offer_id":40715836194875,"sku":"STRIP5","price":335.99,"currency_code":"USD","in_stock":true},{"title":"10 Oz. Sample Jar","offer_id":40715836227643,"sku":"STRIPSA","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/stripit-5-gallon-tclh.jpg?v=1661548584"},{"product_id":"perma-chink-oxcon-oxalic-acid","title":"Perma-Chink OxCon Oxalic Acid","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink OxCon\u003c\/strong\u003e (oxalic acid concentrate) is an effective treatment for rust stains from  around nails, spikes, and screws.\u003c\/p\u003e\n\u003cp\u003e  Oxcon comes as a concentrate that is diluted with water prior to use. It is  best applied using a garden type pump-up sprayer but a brush or broom will also  work. Apply a liberal amount to the wood, let it work on the surface for 10 to  15 minutes and rinse it thoroughly with clean water.\u003cbr\u003e\n  Oxcon should not be used for spot cleaning since it may  cause blotching of the surface.\u003cbr\u003e\n  \u003cbr\u003e\n  \u003cstrong\u003ePerma-Chink OxCon Recommended Applications\u003c\/strong\u003e\u003cbr\u003e\n  • To remove discolorations due to the presence of metallic tannates and rust.\u003cbr\u003e\n  • To brighten the wood after the use of high pH strippers and cleaners.\u003cbr\u003e\n  • To even out the color of a wall that's blotchy.\u003cbr\u003e\n  \u003cbr\u003e\n  \u003cstrong\u003eDo not\u003c\/strong\u003e use OxCon to:\u003cbr\u003e\n  • Remove grayed wood.\u003cbr\u003e\n  • “Neutralize” the wood after the use of other chemicals.\u003cbr\u003e\n  • To remove brown stain, blue stain or flavonoid discolorations.\u003cbr\u003e\n  \u003cbr\u003e\n  \u003cstrong\u003ePerma-Chink OxCon Application Methods  \u0026amp; Special Instructions\u003c\/strong\u003e\u003cbr\u003e\n  • Garden pump sprayer.\u003cbr\u003e\n  • Apply from bottom-up, rinse from top-down.\u003cbr\u003e\n  • Do not allow to freeze.\u003cbr\u003e\n  • Rinse thoroughly and completely.\u003cbr\u003e\n  • Make sure the surface is clean and mold free.\u003cbr\u003e\n  \u003cbr\u003e\n  \u003cstrong\u003ePerma-Chink OxCon Application  Instructions\u003cbr\u003e\n    \u003c\/strong\u003e• Application Temperature - 40° to 90°.\u003cbr\u003e\n  • Mix one (1) part OxCon with four (4) parts water for use. \u003cbr\u003e\n  • Diluted OxCon is designed to remove metallic discolorations as well as to  brighten up wood surfaces that have turned dark from the use of high pH  (alkaline) cleaners and strippers. \u003cbr\u003e\n  • OxCon should not be used to remove grayed wood fibers.\u003cbr\u003e\n  • Wood ReNew™ works best for removing grayed UV damaged surface wood.\u003cbr\u003e\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink OxCon Coverage  Rate \u0026amp; Shelf Life\u003cbr\u003e\n  \u003c\/strong\u003e• OxCon has a coverage rate of 1000 - 2000 square feet \/ gallon depending  on the surface of the wood.\u003cbr\u003e\n  • OxCon has a 6 months shelf life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink OxCon Oxalic Acid Resources\u003c\/strong\u003e\u003cbr\u003e\n\t\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/perma-chink-oxcon-sds-0722-tclhs.pdf?v=1769528390\" target=\"_blank\"\u003eOxCon Oxalic Acid Safety Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"1 Gallon","offer_id":40715836424251,"sku":"OXCON1","price":47.99,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":40715836457019,"sku":"OXCON5","price":162.99,"currency_code":"USD","in_stock":true},{"title":"4 Oz. Sample Can","offer_id":40715836489787,"sku":"OXCONSA","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/oxcon-5-gallon-tclhs.jpg?v=1661548590"},{"product_id":"perma-chink-wood-renew-log-cleaner","title":"Perma-Chink Wood Renew Log Cleaner","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink Wood ReNew\u003c\/strong\u003e is a biodegradable percarbonate-based wood cleaner that cleans and brightens grayed and weathered wood. Use it to return wood to its original natural color before applying any of our quality wood finishes.\u003c\/p\u003e\n\u003cp\u003eWood ReNew contains a thickener that helps it adhere to log walls and siding. Simply wet down the surface you want to clean, mix the Wood ReNew concentrate with water, stir, and liberally apply it to the wood with a mop or brush.\u003c\/p\u003e\n\u003cp\u003eWood ReNew will immediately begin to fizz and  foam as it removes dirt and grime. After about 10 minutes scrub the wood with a medium-bristle brush and rinse thoroughly with clean water. Dirt, mold, mildew, water stains and UV damage will be gone and the wood will have a new, fresh  look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink Wood ReNew Features \u0026amp; Benefits\u003c\/strong\u003e\u003cbr\u003e\n• A safe, effective cleaner designed to remove mold, mildew and dirt from wood surfaces.\u003cbr\u003e\n• Makes most wood surfaces “stain ready.”\u003cbr\u003e\n• Helps remove “graying” caused by ultraviolet light.\u003cbr\u003e\n• Removes mill glaze from smooth wood surfaces.\u003cbr\u003e\n• Contains no chlorine bleach.\u003cbr\u003e\n• Will not harm shrubs or landscaping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink Wood ReNew Special Instructions\u003c\/strong\u003e\u003cbr\u003e\n• Apply from bottom-up, rinse from top-down.\u003cbr\u003e\n• Rinse thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink Wood ReNew Application Instructions\u003c\/strong\u003e\u003cbr\u003e\n• Application Temperature - 40° to 90°.\u003cbr\u003e\n• Mix 4 cups of Wood ReNew with 5 gallons of water and stir (if less than 5 gallons is required, mix 12 tablespoons of powder per gallon). \u003cbr\u003e\n• Wait 10 minutes to allow the solution to thicken.\u003cbr\u003e\n• Mix only enough solution to use in five hours.\u003cbr\u003e\n• Apply solution liberally to the surface with a mop, broom or brush. \u003cbr\u003e\n• Clean from the bottom up, rinse from the top down.\u003cbr\u003e\n• Allow solution to remain on the wood for 10 minutes. If it begins to dry out, mist with a water hose.\u003cbr\u003e\n• If necessary, use a broom or stiff brush to help clean the surface. \u003cbr\u003e\n• Rinse thoroughly with a pressure washer. We strongly recommend the use of pH Strips to verify adequate rinsing.\u003cbr\u003e\n• Heavily stained or discolored areas may need a second application. \u003cbr\u003e\n• Rinse plants shrubs and grass after use.\u003cbr\u003e\n• On some types of wood the cleaned surface may become blotchy or dark. \u003cbr\u003e\n• Use OXcon Blonding Agent to lighten the color of the wood and even out the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink Wood ReNew Coverage Rate  \u0026amp; Shelf Life\u003c\/strong\u003e\u003cbr\u003e\n• Wood Renew has an approximate coverage rate of 2800 - 3000 square feet \/  gallon depending on the surface texture.\u003cbr\u003e\n• Wood Renew has a 5 year shelf life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink Wood Renew Resources\u003c\/strong\u003e\u003cbr\u003e\n\t\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/perma-chink-wood-renew-sds-0822-tclhs.pdf?v=1769529038\" target=\"_blank\"\u003eSafety Data Sheet - Wood Renew Log Cleaner\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"1 Gallon","offer_id":40715840192571,"sku":"WDRENEW1","price":99.99,"currency_code":"USD","in_stock":true},{"title":"4 Oz. Sample Can","offer_id":40715840225339,"sku":"WDRENEWSA","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/wood-renew-1-gallon-tclh.jpg?v=1661548603"},{"product_id":"perma-chink-cedar-wash","title":"Perma-Chink Cedar Wash","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink Cedar Wash\u003c\/strong\u003e is a ready-to-use cleaner specifically formulated for preparing the bare wood surface of wood species that contain high levels of wood extractives and resin oils. Cedar Wash is designed to remove surface resin oils and high concentrations of water-soluble wood extractives in addition to dirt, grease, grime, pollen, and surface mold and mildew without harming the wood.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eCedar Wash Features \u0026amp; Benefits\u003c\/strong\u003e\u003cbr\u003e\n  • Designed specifically for Western Red Cedar and Redwood (Softwoods) and Walnut and Mahogany (Hardwoods).\u003cbr\u003e\n  • Highly recommended cleaner for Southern Pine, Douglas Fir, Spruce and Cypress.\u003cbr\u003e\n  • Removes resin oils and wood extractives from the surface of the wood that may interfere with adhesion of Lifeline exterior stains or Prelude to the wood surface.\u003cbr\u003e\n  • Removes dirt, dust, pollen and other foreign substances from wood surfaces.\u003cbr\u003e\n  • Will not harm finishes that are in good condition.\u003cbr\u003e\n  • Contains an aggressive detergent package for efficient cleaning of the wood surface.\u003cbr\u003e\n  • Safe to use on chinking and sealants.\u003cbr\u003e\n  • Environmentally friendly.\u003cbr\u003e\n  \u003cstrong\u003e• \u003c\/strong\u003ePlease Note:  Cedar Wash is not recommended as a maintenance cleaner. Refer to Log Wash for this task.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eCedar Wash Coverage Rate\u003c\/strong\u003e\u003cbr\u003e\n  • Five gallons of Cedar Wash of ready-to-use cleaning solution will clean approximately 1000 square feet of wood surface area. \u003cbr\u003e\n  • Each gallon of Cedar Wash as applied will clean approximately 175 to 225 square feet of wood surface depending on the wood porosity.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eCedar Wash Application Methods\u003c\/strong\u003e\u003cbr\u003e\n   • Garden Pump Sprayer.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eCedar Wash Application Instructions\u003c\/strong\u003e\u003cbr\u003e\n   • Since Cedar Wash is a ready-to-use material, no dilutions are required.  Cedar Wash is most easily applied using a pump-up garden type sprayer although a mop and bucket works too.  \u003cbr\u003e\n  •  If you are going to use a pressure washer (not recommended) adding Cedar Wash directly to the pressure washer does not give the cleaner enough contact time with the wood to be very effective.  \u003cbr\u003e\n   • Plan on cleaning small areas at a time, since Cedar Wash needs to stay wet in order to work well and do its job.  \u003cbr\u003e\n  •  Apply the Cedar Wash solution starting at the bottom of the wall and work your way up.  \u003cbr\u003e\n  •  Work only an area big enough so that the Cedar Wash is on the wall for about 10 to 15 minutes. \u003cbr\u003e\n   • Gently scrub the wall with a soft bristled brush to remove stubborn stains and heavily soiled areas. \u003cbr\u003e\n   \u003cstrong\u003e• \u003c\/strong\u003eDO NOT ALLOW CEDAR  WASH SOLUTION TO DRY ON THE SURFACE OF THE WOOD. \u003cbr\u003e\n   • Lightly mist with water if applied Cedar Wash solution is drying too fast and  adjust working area. Rinse Cedar Wash solution with clean water using a garden  hose or low pressure washer thoroughly from the top down.  \u003cbr\u003e\n  • \u003cstrong\u003eRemember:\u003c\/strong\u003e Always Apply Cedar Wash from the bottom up, rinse from the top down. This will help prevent the potential for streaks and drip marks on the wood surface. \u003cbr\u003e\n • The use of pH strips is highly recommended as a tool to identify if and when all Cedar Wash residue is thoroughly rinsed off the surface of the wood. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCedar Wash Rinsing \u003c\/strong\u003e\u003cbr\u003e\n • No matter what product you use to clean bare wood, nothing is more important  than making sure you have adequately rinsed the surface.  Any chemical residue remaining on the surface  can have serious consequences later on.  It  is  always  recommend to use pH Strips to make sure that the surface of the wood has been sufficiently rinsed, preferably to a pH of  between 6.5 and 7.5.\u003c\/p\u003e\n  \u003cp\u003e\u003cstrong\u003eCedar Wash Clean-Up\u003c\/strong\u003e\u003cbr\u003e\n   • Use just water to clean up any spilled Cedar Wash.\u003cbr\u003e\n   • You are highly encouraged to wear personal protective equipment (PPE) to protect yourself from chemical exposure when using Cedar Wash. \u003cbr\u003e\n   • Wear safety glasses or goggles and rubber gloves during use.\u003cbr\u003e\n  • Wash hands and any exposed skin with soap and water after job is completed.\u003cbr\u003e\n  • Remove saturated clothing and launder in cool or warm water.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"2.5 Gallon","offer_id":40715840421947,"sku":"CW2","price":69.99,"currency_code":"USD","in_stock":true},{"title":"5 Gallon - (2) 2.5 Gallon Pails","offer_id":40715840454715,"sku":"CW5","price":125.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/cedar-wash-pail-tclh.jpg?v=1661548609"},{"product_id":"savogran-4-lb-tsp-heavy-duty-cleaner-powder","title":"Savogran 4.5 Lb. TSP Heavy Duty Cleaner Powder","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\t\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003eA non-sudsing powdered Trisodium Phosphate (TSP) compound that is formulated for heavy duty cleaning. Preferred by painting and cleaning professionals for removing heavy deposits of greasy grime, smoke, soot stains and chalked paint from walls, woodwork and floors. Removes mildew and mildew stains when mixed with bleach. Cleans and prepares surfaces for repainting. Also recommended for washing away paint remover sludge. \u003cbr\u003e\n  \u003cbr\u003e\nTrisodium phosphate has been used by painters for years and years as a heavy duty degreaser and all purpose cleaner. TSP is formulated for removing Grease, soot,and lead paint dust cleanup. A washing of surfaces prior to painting helps insure a good clean \"bite\" for the finish coats of paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Information:\u003c\/strong\u003e  \u003c\/p\u003e\n\u003cli\u003eThe Original deck and siding cleaner.\u003c\/li\u003e\n  \u003cli\u003eEffectively controls lead paint dust.\u003c\/li\u003e\n  \u003cli\u003eCleans surfaces in preparation for painting.\u003c\/li\u003e\n  \u003cli\u003eUse TSP to clean surfaces after using paint\/varnish removers.\u003c\/li\u003e\n  \u003cli\u003ePreferred by painting and cleaning professionals.\u003c\/li\u003e\n  \u003cli\u003eRemoves smoke and soot stains from walls.\u003c\/li\u003e\n  \u003cli\u003eCleans chalked paint.\u003c\/li\u003e\n  \u003cli\u003eEffective deck and siding cleaner.\u003cbr\u003e\n    \u003cbr\u003e\n    \u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003e\n    \u003cbr\u003e\n    Formulated for heavy duty cleaning. Removes greasy, sooty dirt and prepares previously painting surfaces for repainting.\u003cbr\u003e\n    \u003cbr\u003e\n    \u003cstrong\u003eHeavy Duty Cleaning Instructions:\u003c\/strong\u003e  \u003c\/li\u003e\n  \u003cli\u003eDissolve 1\/2 cup TSP in 2 gallons of hot water.\u003cbr\u003e\n  \u003c\/li\u003e\n\u003cli\u003eSet pail on paper to avoid ring marks.\u003cbr\u003e\n    \u003cbr\u003e\n  \n    \u003cstrong\u003eWalls \u0026amp; Woodwork Cleaning Instructions:         \u003c\/strong\u003e\n  \u003c\/li\u003e\n\u003cli\u003eSqueeze excess cleaner from sponge or cloth.\u003cbr\u003e\n  \u003c\/li\u003e\n\u003cli\u003eWash from bottom up to avoid streaking.\n  \u003c\/li\u003e\n\u003cli\u003eA second washing may be needed.  \n  \u003c\/li\u003e\n\u003cli\u003eRinse cleaned area with clean warm water.\u003cbr\u003e\n    \u003cbr\u003e\n    \n  \u003cstrong\u003eFloor Cleaning Instructions:\u003c\/strong\u003e\u003cbr\u003e\n  \u003c\/li\u003e\n\u003cli\u003eWring excess cleaner from mop or sponge and wash floor in small areas.  \n  \u003c\/li\u003e\n\u003cli\u003eRinse with clean with warm water and wipe up any excess water.  \n  \u003c\/li\u003e\n\u003cli\u003eDo not allow water or TSP to stand in puddles.\u003cbr\u003e\n    \u003cbr\u003e\n    \n    \u003cstrong\u003eHousehold Cleaning Instructions:\u003c\/strong\u003e\u003cbr\u003e\n  \u003c\/li\u003e\n\u003cli\u003eDissolve 1\/4 cup TSP in 2 gallons of hot water.\u003cbr\u003e\n    \u003cbr\u003e\n  \u003cstrong\u003eMildewed Deck Cleaning Instructions:\u003c\/strong\u003e  \n  \u003c\/li\u003e\n\u003cli\u003eRemove by washing with solution of 1 cup TSP in 3 quarts warm water and add 1 quart fresh clorine bleach.  \n  \u003c\/li\u003e\n\u003cli\u003eUse solution to scrub area thoroughly, using scrub brush or coarse rag.  \n  \u003c\/li\u003e\n\u003cli\u003eThe bleach kills fungus growth and removes stains.   \n  \u003c\/li\u003e\n\u003cli\u003eTSP removes dirt and grime and wets surface so bleach can work.  \n  \u003c\/li\u003e\n\u003cli\u003eIf stains remain use second application.   \n  \u003c\/li\u003e\n\u003cli\u003eWhen mildew is gone, rinse thoroughly with clean warm water and dry surface completely before painting.   \n  \u003c\/li\u003e\n\u003cli\u003eThis solution will not stop future mildew growth.\u003cbr\u003e\n   \n\u003c\/li\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Savogran","offers":[{"title":"Default Title","offer_id":40715875385403,"sku":"SAV10622","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/savogran-tsp-powder-4-1-2-lb-tclh.jpg?v=1661548850"},{"product_id":"perma-chink-epoxy-kit","title":"Perma-Chink Epoxy Wood Repair Kit","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003eThe \u003cstrong\u003ePerma-Chink Epoxy Wood Rot Repair Kit\u003c\/strong\u003e includes enough M-Balm and E-Wood for small repairs.\u003c\/p\u003e\n\u003cp\u003eM-Balm epoxy liquid penetrates deeply into porous, deteriorated, dried-out or spongy wood, curing and hardening into a strong, water-resistant mass that includes both the original wood fibers and the epoxy mixture. The more M-Balm used, the stronger the restored wood member will become. It consolidates the decayed area in preparation for use with E-Wood.\u003c\/p\u003e\n\u003cp\u003eE-Wood is a two component epoxy wood putty that may be used to fill in wood voids. It can be textured to match the appearance of the surrounding wood. Hardened E-Wood filler can be sanded, shaped and stained.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003cbr\u003e • Restores strength to deteriorated wood.\u003cbr\u003e • Vinegar clean-up.\u003cbr\u003e • Deep Penetration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Methods\u003c\/strong\u003e\u003cbr\u003e • Squeeze bottle.\u003cbr\u003e • Brush and roller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink M-Balm Resources:\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/mbalm-part-a-sds-1215.pdf\" target=\"_blank\"\u003eSDS Sheet - M-Balm Part A\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/mbalm-part-b-sds-1215.pdf\" target=\"_blank\"\u003eSDS Sheet - M-Balm Part B\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma Chink E-Wood Resources:\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/e-wood-part-a-sds-10-15.pdf\" target=\"_blank\"\u003eSDS Sheet - E-Wood Part A\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/e-wood-part-b-sds-10-15.pdf\" target=\"_blank\"\u003eSDS Sheet - E-Wood Part B\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerma-Chink Epoxy Kit Package Contents:\u003c\/strong\u003e\u003cbr\u003e • (1) 4 Oz. Bottle M-Balm Epoxy (Part A)\u003cbr\u003e • (1) 2 Oz. Bottle M-Balm Hardener (Part B)\u003cbr\u003e • (1) 2 Oz. Bottle E-Wood Epoxy (Part A)\u003cbr\u003e • (1) 2 Oz. Bottle E-Wood Hardener (Part B)\u003cbr\u003e • (4) Measuring Cups\u003cbr\u003e • (2) Gloves\u003cbr\u003e • (4) Mixing Sticks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Information \u0026amp; Technique:\u003c\/strong\u003e\u003cbr\u003e • Application temperature is between 40° F to 90° F.\u003cbr\u003e • Mix two parts of M-Balm Epoxy (Part A) with one part of M-Balm Hardener (Part B) by volume. \u003cbr\u003e • Mix no more that can be applied within 30 minutes. \u003cbr\u003e • Apply E-Wood on clean and dry surface that was restored with M-Balm.\u003cbr\u003e • With disposable gloves on both hands, knead together one part of E-Wood Epoxy(Part A) with one part E-Wood Hardener(Part B) by volume. Mix no more than can be applied within 15 minutes.\u003cbr\u003e • Apply over wood that has been treated and sealed with M-Balm. Mold to a rough finished shape.\u003cbr\u003e • When cured, E-Wood can be sawed, nailed, carved, machined and sanded. E-Wood can tinted or painted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Up \u0026amp; Drying Time:\u003c\/strong\u003e\u003cbr\u003e • Uncured mixed M-Balm or E-Wood (Part A and Part B) may be cleaned up with white vinegar then flushed with water.\u003cbr\u003e • M-Balm and E-Wood hardens in 12 to 24 hours depending on temperature.\u003cbr\u003e • Both products cure slower in low temperatures. (Never change mixing ratio to compensate for temperature.)\u003cbr\u003e • Do not allow to dry on wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf Life:\u003c\/strong\u003e\u003cbr\u003e • E-Wood and M-Balm both have a shelf life of 1 year. \u003cbr\u003e • Do not freeze!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"Perma-Chink","offers":[{"title":"Default Title","offer_id":40715878498363,"sku":"EPOXYKIT","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/products\/permachink-epoxy-kit-tclhs.jpg?v=1661548942"},{"product_id":"mildew-x-mildewcide-additive","title":"Mildew-X Mildewcide Additive","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cstrong\u003eMildew-X\u003c\/strong\u003e is a paint additive designed to control the growth of mold and mildew. Mildew-X can be applied to any stain, sealant, or latex coating. Make sure to apply per the manufacturer's instructions. With the combination of Lemongrass and Geranium oil, Mildew X is highly effective against mold and mildew growth.  Mildew-X qualifies for exemption from EPA registration under FIFRA section 25(b) as a minimum risk pesticide.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMildew-X Features and Benefits\u003c\/strong\u003e\u003cbr\u003e • Indoor and outdoor use\u003cbr\u003e • Eco Friendly\u003cbr\u003e • Controls most common types of mildew\u003cbr\u003e • Effective up to 3 years\u003cbr\u003e • Minimum risk pesticide\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMildew-X Application Instructions\u003c\/strong\u003e\u003cbr\u003e • To treat a 5 Gallon pail, pour entire contents of bottle into any latex paint or stain.\u003cbr\u003e • To treat 1 Gallon, apply 1-2\/3 fl oz into side chamber of bottle.\u003cbr\u003e • Mix well to ensure proper dilution.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdditional Resources:\u003c\/b\u003e\u003cbr\u003e\n  • \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/perma-chink-mildew-x-sds-0919-tclhs.pdf?v=1769528238\" target=\"_blank\"\u003eMildew-X Safety Data Sheet \u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy here --\u003e","brand":"Walla Walla Environmental","offers":[{"title":"8.3 Oz - 5 Gallon Treatment","offer_id":41289790849083,"sku":"MLDX5","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/mildew-x-5-gallon-treatment-paint-additive.jpg?v=1687448863"},{"product_id":"expert-clean-bright-wood-stripper","title":"Expert Clean \u0026 Bright Wood Stripper","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cb\u003eExpert Clean and Bright Wood Stripper\u003c\/b\u003e is made with Sodium Hydroxide and an added Sodium Metasilicate boost to help lift old oil-based stains, extreme organic growth and some water based coatings. A butyl booster can be added to remove tough water-based stains.\u003c\/p\u003e\n\u003cp\u003eAlways brighten the wood after using this cleaner using Expert Clean and Bright Wood Brightener.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMixing Instructions\u003c\/b\u003e\u003cbr\u003e • For a light strip, mix 2 oz. cup per gallon of water.\u003cbr\u003e • For a medium strip, mix 4 oz. per gallon of water.\u003cbr\u003e • For a heavy strip, mix 8 oz. per gallon of water.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGeneral Instructions\u003c\/b\u003e\u003cbr\u003e • Strippers must be kept wet or they will not work.  A light mist every few minutes will suffice.\u003cbr\u003e • Test on a small, inconspicuous area of the wood to ensure proper wood care.\u003cbr\u003e • Always wet plants, shrubs, and other surrounding vegetation before and after use.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSafety Precautions\u003c\/b\u003e\u003cbr\u003e • Extreme caution should be taken when using strippers. They will burn skin, remove paint from houses, and kill plants, grass and pets. \u003cbr\u003e • Keep out of reach of children.\u003cbr\u003e • Exposure to sodium hydroxide or sodium metasilicate could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention.\u003cbr\u003e • Do not ingest.\u003cbr\u003e • Always wear personal protective equipment when using this product.\u003cbr\u003e • DO NOT MIX WITH OTHER CHEMICALS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Shipping Note\u003c\/strong\u003e\u003cbr\u003e • Expert Clean \u0026amp; Bright Wood Stripper may not be shipped via air transit due to D.O.T. restrictions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Resources\u003c\/strong\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/expert-clean-and-bright-brochure-2025-compressed.pdf?v=1773775763\" target=\"_blank\"\u003eExpert Clean and Bright Brochure\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/expert-clean-and-bright-wood-stripper-safety-data-sheet-2024.pdf?v=1773775291\" target=\"_blank\"\u003eExpert Wood Stripper Safety Data Sheet (SDS)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy here --\u003e","brand":"Expert Stain and Seal","offers":[{"title":"32 Oz.","offer_id":41441945092155,"sku":"EWS32","price":44.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":41441945124923,"sku":"EWS1","price":79.99,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":41441945157691,"sku":"EWS5","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/expert-clean-and-bright-wood-stripper-5-gallon-tclhs.webp?v=1773866542"},{"product_id":"expert-clean-bright-wood-brightener","title":"Expert Clean \u0026 Bright Wood Brightener","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cb\u003eExpert Clean and Bright Wood Brightener, \u003c\/b\u003e made with 100% Oxalic Acid, is used to brighten darkened wood and to neutralize wood surfaces' pH after strip cleaning.\u003c\/p\u003e\n\u003cp\u003eExpert Clean \u0026amp; Bright specifies that the Wood Brightener should be used as a follow-up step to using their Wood Stripper.\u003c\/p\u003e\n\u003cp\u003eExpert Wood Brightener is also used to brighten wood fences, decks, log homes, and patio furniture. \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eExpert Wood Brightener Benefits\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrings back the original color of the wood\u003c\/li\u003e\n\u003cli\u003eNeutralizes and brightens wood after any alkaline chemical wash\u003c\/li\u003e\n\u003cli\u003eRestores proper pH in wood and opens wood grain to accept more stain\u003c\/li\u003e\n\u003cli\u003eRemoves rust and tannin stains\u003c\/li\u003e\n\u003cli\u003e100% Oxalic Acid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eMixing Instructions\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMix 4 - 8 oz. per gallon of water.\u003c\/li\u003e\n\u003c\/ul\u003e\n*** At 8 oz. per gallon mix ratio, (1) 1 gallon pail of powdered oxalic acid Wood Brightener will make 16 gallons of Wood Brightener solution.\u003cbr\u003e \u003cbr\u003e\n\u003cp\u003e\u003cb\u003eProduct Resources\u003c\/b\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/expert-clean-and-bright-brochure-2025-compressed.pdf?v=1773775763\" target=\"_blank\"\u003eExpert Clean \u0026amp; Bright Brochure\u003c\/a\u003e\u003cbr\u003e • \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/expert-clean-and-bright-wood-brightener-safety-data-sheet-2024.pdf?v=1773775275\" target=\"_blank\"\u003eExpert Clean \u0026amp; Bright Wood Brightener Safety Data Sheet (SDS)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy here --\u003e","brand":"Expert Stain and Seal","offers":[{"title":"8 Oz.","offer_id":41445649481787,"sku":"EWB8","price":12.99,"currency_code":"USD","in_stock":true},{"title":"32 Oz.","offer_id":41445649514555,"sku":"EWB32","price":39.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":41445649547323,"sku":"EWB1","price":69.99,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":41445649580091,"sku":"EWB5","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/expert-clean-and-bright-wood-brightener-5-gallon-tclhs.webp?v=1773864512"},{"product_id":"frog-tape-delicate-surface-painters-tape","title":"Frogtape Delicate Surface Painter's Tape - 1.88 in. x 60 yards","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cb style=\"font-size: 0.875rem;\"\u003eFrogTape® Delicate Surface Painter’s Tape \u003c\/b\u003ewill give you the sharpest paint lines possible on your next project. This premium washi painter's tape is treated with exclusive PaintBlock® Technology to seal tape edges and prevent paint bleed. It's specially designed with a lower adhesion level to help prevent surface damage on delicate surfaces, such as freshly-painted walls, coated wallpaper, and decorative projects.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures and Benefits:\u003c\/b\u003e\u003cbr\u003e• Premium grade\u003cbr\u003e• Treated with PaintBlock Technology\u003cbr\u003e• Low adhesion\u003cbr\u003e• Washi paper backing\u003cbr\u003e• Synthetic rubber-based adhesive\u003cbr\u003e• Easy and clean removal\u003cbr\u003e• Perfect for decorative projects\u003c\/p\u003e\n\u003cp\u003e** For best results, remove tape while paint is still wet for sharp paint lines and professional-looking results. Test before use on all surfaces and when using solvent-based coatings. FrogTape was designed for use with latex paint and may not be compatible with all floor surfaces.**\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eStorage and Use:\u003c\/b\u003e\u003cbr\u003e• Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of shipment date. Surfaces to which tape is applied should be clean, dry, and free of grease, oil, or other contaminants.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIdeal Surfaces:\u003c\/b\u003e\u003cbr\u003e• This product is intended for interior use on finished wood, freshly painted walls and trim (24 hours old), coated wallpaper, laminate, vinyl, primed wall board, cabinets, and floors.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Guides:\u003c\/b\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/safety-data-sheet.pdf?v=1738700018\" target=\"_blank\"\u003eFrogTape Safety Data Sheet\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/frog-tape-tech-data-sheet.pdf?v=1738700018\" target=\"_blank\"\u003eFrogTape Tech Data Sheet\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/shurtape-technologies-compliance-letter.pdf?v=1738700018\" target=\"_blank\"\u003eFrogTape Compliance Letter\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/frog-tape-product-info-0522.pdf?v=1738790284\" target=\"_blank\"\u003eFrogTape Product Info\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/shurtape-masking-and-paper-tapes-pro-guide-2024.pdf?v=1738790285\"\u003eFrogTape Masking and Paper Tapes Pro Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"FrogTape","offers":[{"title":"Default Title","offer_id":41953442922555,"sku":"FTDS188","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/frog-tape-delicate-surface-painters-tape.webp?v=1738791588"},{"product_id":"crown-paint-thinner","title":"Crown Paint Thinner","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cb\u003eCrown Paint Thinner\u003c\/b\u003e is a high-quality thinner designed for use with oil-based paints, varnishes, and enamels. It may be used as a cleaning solvent for brushes, rollers, spray equipment, roller trays, and to remove dirt or grease before painting to improve brushing capabilities. \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures \u0026amp; Benefits:\u003c\/b\u003e\u003cbr\u003e• Helps thin oil-based paints, varnishes, and enamels\u003cbr\u003e• Can be used as a cleaning solvent for paint supplies\u003cbr\u003e• Removes dirt and grease\u003cbr\u003e• Improves brushing quality\u003cbr\u003e• Meets federal specification TT-T-291\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Guides:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/crown-paint-thinner-safety-data-sheet-1224.pdf?v=1738687849\" target=\"_blank\"\u003eCrown Paint Thinner Safety Data Sheet\u003c\/a\u003e \u003c!-- end Twin Creeks Log Home Supply copy here --\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Crown","offers":[{"title":"1 Quart","offer_id":41994492805179,"sku":"CRPT32","price":7.95,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":41994492837947,"sku":"CRPT1G","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/crown-paint-thinner-quart.webp?v=1738686602"},{"product_id":"frogtape-multi-surface-painters-tape-1-41-in-x-60-yards","title":"Frogtape Multi-Surface Painter's Tape - 1.41 in. x 60 yards","description":"\u003c!-- start Twin Creeks Log Home Supply copy here --\u003e\n\u003cdiv class=\"detailDescription\"\u003e\n\u003cp\u003e\u003cb style=\"font-size: 0.875rem;\"\u003eFrogTape® Multi-Surface Painter’s Tape \u003c\/b\u003ewill give you the sharpest paint lines on your next project. This premium painter's tape is treated with exclusive PaintBlock® Technology to seal tape edges and prevent paint bleed. Featuring medium adhesion, this multi-surface painter's tape is ideal for a variety of surfaces and applications. Plus, the solvent-free, high-performance adhesive bonds quickly to the surface, allowing for immediate paint application.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrogTape Features and Benefits:\u003c\/b\u003e\u003cbr\u003e• Premium grade\u003cbr\u003e• Treated with PaintBlock Technology\u003cbr\u003e• Medium adhesion\u003cbr\u003e• 21-day clean removal\u003cbr\u003e• Withstands direct outdoor sunlight for up to 7 days\u003cbr\u003e• Fine structured crepe backing\u003cbr\u003e• Rubber-based adhesive\u003cbr\u003e• Perfect for decorative projects\u003c\/p\u003e\n\u003cp\u003e** For best results, remove tape while paint is still wet for sharp paint lines and professional-looking results. Test before use on all surfaces and when using solvent-based coatings. FrogTape was designed for use with latex paint and may not be compatible with all floor surfaces.**\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrogTape Storage and Use:\u003c\/b\u003e\u003cbr\u003e• Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of shipment date. Surfaces to which tape is applied should be clean, dry, and free of grease, oil, or other contaminants.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrogTape Ideal Surfaces:\u003c\/b\u003e\u003cbr\u003e• This product is intended for interior or exterior use on cured painted walls, wood trim, glass, and metal.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Guides:\u003c\/b\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/frog-tape-multi-surface-painters-tape-safety-data-sheet.pdf?v=1746646563\" target=\"_blank\"\u003eFrogTape Safety Data Sheet\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/frog-tape-multi-surface-painters-tape-tech-data-sheet.pdf?v=1746646563\" target=\"_blank\"\u003eFrogTape Tech Data Sheet\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/frog-tape-multi-surface-painters-tape-compliance-letter.pdf?v=1746646619\" target=\"_blank\"\u003eFrogTape Compliance Letter\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/frog-tape-product-info-0522.pdf?v=1738790284\" target=\"_blank\"\u003eFrogTape Product Info\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/shurtape-masking-and-paper-tapes-pro-guide-2024.pdf?v=1738790285\"\u003eFrogTape Masking and Paper Tapes Pro Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- end Twin Creeks Log Home Supply copy --\u003e","brand":"FrogTape","offers":[{"title":"Default Title","offer_id":42178146828347,"sku":"FTMS120","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/8488\/2747\/files\/frog-tape-multi-surface-painters-tape-0525.webp?v=1746644391"}],"url":"https:\/\/www.twincreeksloghomes.com\/en-ca\/collections\/stain-prep-products.oembed?page=2","provider":"Twin Creeks Log Home Supply","version":"1.0","type":"link"}