CPR Log Cleaner is used to clean and brighten uncoated wood that is dirty, faded or gray from UV exposure.

Mix CPR to the brightening solution strength for use on new construction just prior to staining to remove dirt and grime from the building process and to break down mill glaze.

Mix CPR at the cleaning solution strength for periodic cleaning on stained logs to extend the life of your stain.

Sashco CPR Features & Benefits
• Oxygenated bleach cleaner and brightener.
• Gentle on wood.
• Removes variety of stains.
• Brightens sun-damaged wood.
• Environmentally friendly.
• Easy to mix and apply.

Sashco CPR Coverage Rate
• At either strength, solution coverage is between 100-150 square feet per gallon (500-750 square feet per 5 gallons), depending on the wood porosity.

Sashco CPR Application Instructions
• Cleaner Strength: Mix 1/2 of the container with 4 gallons of clean water in a clean 5-gallon plastic pail.
• Brightener Strength: Mix the entire container with 4 gallons of clean water in a clean 5-gallon plastic pail.
•Apply via garden sprayer, brush or mop.
• Brush any dirt, loose material or other contaminants from wood surfaces to ensure good contact with the surface you wish to clean or brighten.
• Keep the solution off surfaces you do not want bleached.
• Use in warm weather, between 60° and 90°F, for best results.
• Apply CPR to one wall at a time, starting at the bottom and working completely across, 2-5 logs high.
• Allow the solution to work for 5-20 minutes, keeping the surfaces wet with additional CPR solution.
• For best results, vigorously scrub the surfaces with a stiff-bristle brush to remove unsound surface wood.
• Clean up: Clean brushes and equipment with soap and water.