PeneTreat is a borate-based wood preservative. Borates are well-known across the world for their protective qualities. And like other borates, PeneTreat is highly effective in the prevention of most rot and wood-boring insects. When using PeneTreat, a protective “shell” coating helps defend your home against dry, wet, and brown rot as well as termites, house borers, powderpost beetles and carpenter ants.

PeneTreat™ is a powder that is mixed with water and then applied with a brush or sprayed on with a garden sprayer. It is also EPA-approved. PeneTreat™ will not effect the color of wood, interfere with stain or caulk adhesion, and is completely odorless. Low cost and easy application make PeneTreat™ the popular choice.

Sashco Penetreat Features & Benefits
• Borate-based wood preservative prevents rot.
• Deters wood-ingesting insects.
• Easy to mix and apply.
• Freeze-thaw stable.

Sashco Penetreat Coverage Rate
• 6-gallon size: 27 gallons of a 10% solution will cover 4050 sq. ft. of log surface.
• 3 1/2-gallon size: 15 gallons will cover 2250 sq. ft. of log surface.

Sashco Penetreat Application Instructions
• PeneTreat can be applied by brushing, spraying, dipping, kerf-flooding or hole flooding.
• PeneTreat will not interfere with the adhesion of most wood stains and coatings.
• Mix PeneTreat at a rate of 1-pound (1 loosely packed quart) to 1-gallon of water.
• Wood must be clean and bare; free of dirt, wax and surface finishes and above 40°F and rising.
• Apply PeneTreat at the rate of 1 mixed gallon per 150 sq. ft. of wood surface.
• Apply a second coat 4 to 24 hours later. Thoroughly soak cut ends.
• Coat the logs with a water-repellent finish after the PeneTreat solution has thoroughly dried.
• Clean up: Use soap and water to clean equipment, skin and clothing.