Weatherall UV Guard II Stain - finally, a true, two-coat system! Now you can ensure consistent color, protect the charm and beauty of your home & not go through an extensive process of applying one or two coats of this & another of that to get the protection you need.

Weatherall UV Guard II achieves its superior level of protection in only two coats; one heavy, back brushed saturation coat of color followed by a clear top coat.

Weatherall UV Guard II Uses
• Weatherall UV Guard II is designed for use on log homes, quality wood siding, and other vertical wood surfaces as well as wood shingles.

Weatherall UV Guard II Features & Benefits
• UV Protection - Resists discoloration, cracking and splitting caused by the sun's harmful rays.
• Moisture Protection - Penetrates and seals the wood's surface. Resists warping, swelling and cracking caused by moisture.
• Mold & Mildew Protection - Contains and effective and environmentally safe biocide that resists decay and deterioration caused by mold and mildew.
• Easy Application - Goes on quickly and easily by brush or pump sprayer.
• Quick Drying - Normally surface dries within 30 minutes.
• Safe to Use - Odorless when dry, non-flammable, increases kindling temperature/time of wood when dry. Safe for interior use.
• Minimum Preparation Required - May be applied directly over many existing water based log finishes.
• Ideal Surface - Provides an excellent adhesive surface for chinking, and virtually eliminates all debonding problems that are likely to occur with other popular finishes.

Weatherall UV Guard II Coverage Rate
• Hand-Peeled Logs and Planed Lumber: 200-300 sq. ft./gallon on the first coat, and 400-500 sq. ft./gallon on subsequent coats.
• Milled Logs and Rough Sawn Lumber: 150-250 sq. ft./gallon on the first coat, and 300-400 sq. ft./gallon on subsequent coats.

Weatherall UV Guard II Application Information
• Weatherall UV Guard II can be easily applied by brush, airless sprayer or pump style garden sprayer.
• Weatherall UV Guard II will be dry to the touch in 30 minutes to 1 hour and completely dry in 24 to 48 hours depending on temperature and relative humidity.
• If spray application is used, back brushing is mandatory.
• Clean up: Clean up immediately with soap and water. Dried brushes will require cleaning with lacquer thinner.